Experimental study of slender concrete-filled elliptical hollow section beam-columns

被引:64
作者
McCann, F. [1 ]
Gardner, L. [1 ]
Qiu, W. [1 ]
机构
[1] Univ London Imperial Coll Sci Technol & Med, Dept Civil & Environm Engn, London SW7 2AZ, England
关键词
Composite structures; Concrete-filled steel tubes; Design of structures; Elliptical sections; Experimental investigation; Tubular sections; EXPERIMENTAL BEHAVIOR; STRUCTURAL DESIGN; FIRE RESISTANCE; STEEL; TESTS; STRENGTH;
D O I
10.1016/j.jcsr.2015.06.013
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Experiments on concrete-filled elliptical hollow section beam-columns have been conducted to examine their fundamental structural behaviour. A total of 27 specimens were tested 3 stub columns and 24 longer members of varying slenderness. Seven of the tested specimens also contained steel reinforcement. The specimens were loaded in compression, either concentrically or with different major or minor axis eccentricities. Measurements of the applied load, the strains at mid-height, the axial displacement and the lateral deflection at mid-height were recorded. Plots of load against the lateral deflection at mid-height and load against axial displacement are presented for the specimens, along with values of strength index and ductility index. Comparisons have been made between the test results and the provisions of the European Standard EN 1994-1-1:2004 for determining the ultimate load of concrete-filled circular and rectangular hollow section columns. It was found that the predicted resistances are safe for use in the design of concrete-filled elliptical hollow section columns either with or without reinforcement, and loaded either concentrically or eccentrically. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码:185 / 194
页数:10
相关论文
共 49 条
[1]  
Bergmann R., 1995, Design guide for concrete filled hollow section columns under static and seismic loading (CIDECT). Eds.)
[2]  
British Standards Institution, 2009, 689212009 BS EN ISO
[3]   Bending strength of hot-rolled elliptical hollow sections [J].
Chan, T. M. ;
Gardner, L. .
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2008, 64 (09) :971-986
[4]   Compressive resistance of hot-rolled elliptical hollow sections [J].
Chan, T. M. ;
Gardner, L. .
ENGINEERING STRUCTURES, 2008, 30 (02) :522-532
[5]  
Chan TM, 2010, P I CIVIL ENG-STR B, V163, P391, DOI [10.1680/stbu.2010.163.6.391, 10.1680/stbu.2010.1686.891]
[6]   Flexural Buckling of Elliptical Hollow Section Columns [J].
Chan, T. M. ;
Gardner, L. .
JOURNAL OF STRUCTURAL ENGINEERING, 2009, 135 (05) :546-557
[7]  
Comite Europeen de Normalisation, 2004, 1994112004 BRIT STAN
[8]  
Comite Europeen de Normalisation, 2005, 1993112005 EN BRIT S
[9]  
Comite Europeen de Normalisation, 2006, 1021012006 EN BRIT S
[10]   Self-compacting concrete: An analysis of 11 years of case studies [J].
Domone, PL .
CEMENT & CONCRETE COMPOSITES, 2006, 28 (02) :197-208