High temperature corrosion of superheater steels by KCl and K2CO3 under dry and wet conditions

被引：65

作者：

Lehmusto, J. ^{[1
]}

Yrjas, P. ^{[1
]}

Skrifvars, B. -J. ^{[1
]}

Hupa, M. ^{[1
]}

机构：

[1] Abo Akad Univ, SF-20500 Turku, Finland

来源：

FUEL PROCESSING TECHNOLOGY | 2012年 / 104卷

关键词：

Ferritic steel; High temperature oxidation; Nickel-based alloy; Potassium chloride; Potassium carbonate; Water vapor; FE-CR ALLOYS; WASTE INCINERATION ENVIRONMENT; WATER-VAPOR; OXIDIZING ATMOSPHERES; STAINLESS-STEEL; POTASSIUM-SALTS; FIRED BOILERS; OXIDATION; CHROMIUM; CHLORINE;

D O I：

10.1016/j.fuproc.2012.05.020

中图分类号：

O69 [应用化学];

学科分类号：

081704 ;

摘要：

The influence of both solid KCl and solid K2CO3 on the oxidation behavior of a ferritic 10CrMo type steel and a nickel-based Alloy 625 type steel was investigated in the laboratory. Samples were exposed for a week at temperatures of 500 degrees C, 550 degrees C, and 600 degrees C. The role of water vapor was also studied by carrying out exposures under two different atmospheres: dry air, and air with a water content of 30%. Analyses were performed with SEM/EDXA to determine the extent of corrosion, the elemental distribution, and the identification of corrosion products. Both salts were found to be corrosive towards both steels, but the influence of KCl was significantly greater than that of K2CO3. In terms of durability. Alloy 625 exhibited higher corrosion resistance than 10CrMo. In the case of 10CrMo, the oxide formed always consisted of iron oxide with a chromium-rich region near the original steel surface. In the case of Alloy 625, the oxide consisted mainly of nickel oxide when it formed in the presence of KCl, and chromium oxide when it formed in the presence of K2CO3. (C) 2012 Elsevier B.V. All rights reserved.

引用

页码：253 / 264

页数：12

共 35 条

[1] Evidence for chromium evaporation influencing the oxidation of 304L: The effect of temperature and flow rate [J].

Asteman, H ;

Svensson, JE ;

Johansson, LG .

OXIDATION OF METALS, 2002, 57 (3-4) :193-216

[2] Indication of chromium oxide hydroxide evaporation during oxidation of 304L at 873 K in the presence of 10% water vapor [J].

Asteman, H ;

Svensson, JE ;

Johansson, LG ;

Norell, M .

OXIDATION OF METALS, 1999, 52 (1-2) :95-111

[3] A thermodynamic study of the gaseous potassium chemistry in the convection sections of biomass fired boilers [J].

Blomberg, T. .

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2011, 62 (07) :635-641

[4] High temperature corrosion of superheater materials below deposited biomass ashes in biomass combusting atmospheres [J].

Cha, S. C. .

CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2007, 42 (01) :50-60

[5] Fundamental studies on alkali chloride induced corrosion during combustion of biomass [J].

Cha, SC ;

Spiegel, M .

HIGH TEMPERATURE CORROSION AND PROTECTION OF MATERIALS 6, PRT 1 AND 2, PROCEEDINGS, 2004, 461-464 :1055-1062

[6] Utilizing biomass and waste for power production - a decade of contributing to the understanding, interpretation and analysis of deposits and corrosion products [J].

Frandsen, FJ .

FUEL, 2005, 84 (10) :1277-1294

[7] THE EFFECTS OF CHLORIDES, HYDROGEN-CHLORIDE, AND SULFUR-DIOXIDE IN THE OXIDATION OF STEELS BELOW DEPOSITS [J].

GRABKE, HJ ;

REESE, E ;

SPIEGEL, M .

CORROSION SCIENCE, 1995, 37 (07) :1023-1043

[8] Stability of protective oxide films in waste incineration environment - solubility measurement of oxides in molten chlorides [J].

Ishitsuka, T ;

Nose, K .

CORROSION SCIENCE, 2002, 44 (02) :247-263

[9] High temperature corrosion mechanisms and effect of alloying elements for materials used in waste incineration environment [J].

Kawahara, Y .

CORROSION SCIENCE, 2002, 44 (02) :223-245

[10] Thermogravimetric studies of high temperature reactions between potassium salts and chromium [J].

Lehmusto, J. ;

Lindberg, D. ;

Yrjas, P. ;

Skrifvars, B. -J. ;

Hupa, M. .

CORROSION SCIENCE, 2012, 59 :55-62

← 1 2 3 4 →