Zinc subjected to plastic deformation by complex loading and conventional extrusion: Comparison of the microstructure and mechanical properties

被引：51

作者：

Piela, K. ^{[1
]}

Wrobel, M. ^{[1
]}

Sztwiertnia, K. ^{[2
]}

Jaskowski, M. ^{[1
]}

Kawalko, J. ^{[2
]}

Bieda, M. ^{[2
]}

Kiper, M. ^{[1
]}

Jarzebska, A. ^{[2
]}

机构：

[1] AGH Univ Sci & Technol, 30 Av Mickiewicza, PL-30059 Krakow, Poland

[2] Polish Acad Sci, Inst Met & Mat Sci, 25 Reymonta St, PL-30059 Krakow, Poland

来源：

MATERIALS & DESIGN | 2017年 / 117卷

关键词：

Zinc; Extrusion; Complex deformation paths; Microstructure formation; Mechanical properties; IN-VITRO DEGRADATION; ZN-BASED ALLOYS; BIODEGRADABLE METALS; CORROSION PROPERTIES; DENDRITIC GROWTH; ELEMENTS MG; KOBO METHOD; SR; BEHAVIOR; DESIGN;

D O I：

10.1016/j.matdes.2016.12.056

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The microstructure and properties of cast and hot extruded zinc subjected to plastic deformation by conventional extrusion and by extrusion with a forward-backward rotating die (KoBo) were studied. KoBo significantly increased the mechanical properties of both initial materials compared with conventional extrusion. The improvement of the mechanical properties is related to the lower temperature at which the KoBo process can be carried out. Extrusion with a forward-backward rotating die leads to grain refinement and promotes the formation of a composite-like microstructure with a hard matrix, forming an interconnected network of boundaries filled with a softer phase. New areas of application for zinc obtained by the KoBo method are opened. (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：111 / 120

页数：10

共 42 条

[1]

ASTM, E11210 ASTM

[2]

Bochniak W., 2010, ANAL MECH PROPERTIES

[3] Nano Grained Structure in KOBO Extruded Bulk Products [J].

Bochniak, Wlodzimierz ;

Blaz, Ludwik ;

Korbel, Andrzej .

JOURNAL OF NANO RESEARCH, 2010, 10 :11-17

[4] Metallic zinc exhibits optimal biocompatibility for bioabsorbable endovascular stents [J].

Bowen, Patrick K. ;

Guillory, Roger J., II ;

Shearier, Emily R. ;

Seitz, Jan-Marten ;

Drelich, Jaroslaw ;

Bocks, Martin ;

Zhao, Feng ;

Goldman, Jeremy .

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 2015, 56 :467-472

[5] Zinc Exhibits Ideal Physiological Corrosion Behavior for Bioabsorbable Stents [J].

Bowen, Patrick K. ;

Drelich, Jaroslaw ;

Goldman, Jeremy .

ADVANCED MATERIALS, 2013, 25 (18) :2577-2582

[6] Nature of friction in extrusion process and its effect on material flow [J].

Flitta, I ;

Sheppard, T .

MATERIALS SCIENCE AND TECHNOLOGY, 2003, 19 (07) :837-846

[7] Elementary model of severe plastic deformation by KoBo process [J].

Gusak, A. ;

Danielewski, M. ;

Korbel, A. ;

Bochniak, M. ;

Storozhuk, N. .

JOURNAL OF APPLIED PHYSICS, 2014, 115 (03)

[8]

Hu H., 1974, Texture, V1, P233, DOI 10.1155/TSM.1.233

[9] FABRICATION AND NOVEL PROPERTIES OF NANOSTRUCTURED AL BASE ALLOYS [J].

INOUE, A .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1994, 179 :57-61

[10]

Korbel A., 1998, U.S. Patent, Patent No. [5,737,959, 5737959]

← 1 2 3 4 5 →