Effect of temperature change on power generation of microbial fuel cell

被引:68
作者
Li, L. H. [1 ]
Sun, Y. M. [1 ]
Yuan, Z. H. [1 ]
Kong, X. Y. [1 ]
Li, Y. [1 ]
机构
[1] Chinese Acad Sci, Guangzhou Inst Energy Convers, CAS Key Lab Renewable Energy, Guangzhou 510640, Guangdong, Peoples R China
基金
中国国家自然科学基金;
关键词
temperature; microbial fuel cell; power generation; WASTE-WATER TREATMENT; ELECTRICITY-GENERATION; ANODIC BIOFILM; PERFORMANCE; CONFIGURATION;
D O I
10.1080/09593330.2013.828101
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Microbial fuel cell (MFC), which can directly generate electricity from biodegradable materials, has been receiving increasing attention. Effects of temperature change on power density, electrode potential, columbic efficiency, chemical oxygen demand removal and internal resistance in two chambers MFCs were examined in this paper. The maximum power density of 7.89 W/m(3) was achieved at 37 degrees C, with 199% higher at 10 degrees C (2.64 W/m(3)), 24% higher at 30 degrees C (6.34 W/m(3)) and 21% higher at 43 degrees C, no steady power generation was observed at 55 degrees C. Low temperature to 10 degrees C might have a huge effect on anode potential, especially at higher current, but increasing the temperature to 43 degrees C had a main effect on the cathode performance when the MFCs have been established at 37 degrees C. The internal resistance of MFC was about 29 at 37 degrees C, and increased 62% and 303% when MFC switched to 30 degrees C and 10 degrees C. Similarly, internal resistance increased 48% at 43 degrees C. The effect of temperature on MFC performance was expressed by internal resistance, the higher the internal resistance of MFC, the lesser the power density obtained. The Columbic efficiencies were 8.65% at 30 degrees C, 8.53% at 37 degrees C, and 13.24% at 43 degrees C. These results demonstrate that MFCs can effectively be operated over a wide range of temperatures.
引用
收藏
页码:1929 / 1934
页数:6
相关论文
共 28 条
[1]   Effect of operating temperature on performance of microbial fuel cell [J].
Behera, M. ;
Murthy, S. S. R. ;
Ghangrekar, M. M. .
WATER SCIENCE AND TECHNOLOGY, 2011, 64 (04) :917-922
[2]   A thermophilic microbial fuel cell design [J].
Carver, Sarah M. ;
Vuoriranta, Pertti ;
Tuovinen, Olli H. .
JOURNAL OF POWER SOURCES, 2011, 196 (08) :3757-3760
[3]   Electricity generation of single-chamber microbial fuel cells at low temperatures [J].
Cheng, Shaoan ;
Xing, Defeng ;
Logan, Bruce E. .
BIOSENSORS & BIOELECTRONICS, 2011, 26 (05) :1913-1917
[4]   Brewery wastewater treatment using air-cathode microbial fuel cells [J].
Feng, Yujie ;
Wang, Xin ;
Logan, Bruce E. ;
Lee, He .
APPLIED MICROBIOLOGY AND BIOTECHNOLOGY, 2008, 78 (05) :873-880
[5]   The performance of a thermophilic microbial fuel cell fed with synthesis gas [J].
Hussain, A. ;
Mehta, P. ;
Raghavan, V. ;
Wang, H. ;
Guiot, S. R. ;
Tartakovsky, B. .
ENZYME AND MICROBIAL TECHNOLOGY, 2012, 51 (03) :163-170
[6]   Enrichment, performance, and microbial diversity of a thermophilic mediatorless microbial fuel cell [J].
Jong, Bor Chyan ;
Kim, Byung Hong ;
Chang, In Seop ;
Liew, Pauline Woan Ying ;
Choo, Yeng Fung ;
Kang, Gi Su .
ENVIRONMENTAL SCIENCE & TECHNOLOGY, 2006, 40 (20) :6449-6454
[7]   Effect of cathode electron-receiver on the performance of microbial fuel cells [J].
Kong, Xiaoying ;
Sun, Yongming ;
Yuan, Zhenhong ;
Li, Dong ;
Li, Lianhua ;
Li, Yin .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2010, 35 (13) :7224-7227
[8]   Effect of temperature on the performance of microbial fuel cells [J].
Larrosa-Guerrero, A. ;
Scott, K. ;
Head, I. M. ;
Mateo, F. ;
Ginesta, A. ;
Godinez, C. .
FUEL, 2010, 89 (12) :3985-3994
[9]   Effect of temperature and solid concentration on anaerobic digestion of rice straw in South China [J].
Li Lianhua ;
Li Dong ;
Sun Yongming ;
Ma Longlong ;
Yuan Zhenhong ;
Kong Xiaoying .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2010, 35 (13) :7261-7266
[10]   Power generation in fed-batch microbial fuel cells as a function of ionic strength, temperature, and reactor configuration [J].
Liu, H ;
Cheng, SA ;
Logan, BE .
ENVIRONMENTAL SCIENCE & TECHNOLOGY, 2005, 39 (14) :5488-5493