Mechanical and thermal properties of nanocarbon-reinforced aluminum matrix composites at elevated temperatures

被引：130
作者：
Shin, S. E. [1 ]
Ko, Y. J. [1 ]
Bae, D. H. [1 ]
机构：
[1] Yonsei Univ, Dept Mat Sci & Engn, Seoul 03722, South Korea
来源：
COMPOSITES PART B-ENGINEERING | 2016年 / 106卷
基金：
新加坡国家研究基金会;
关键词：
Metal-matrix composites (MMCs); Mechanical properties; Thermal properties; Powder processing; CARBON NANOTUBES; AUTOMOTIVE APPLICATIONS; EXPANSION COEFFICIENTS; STRENGTHENING BEHAVIOR; RAMAN-SPECTRA; GRAPHENE; NANOCOMPOSITES; TRIBOLOGY; GRAPHITE; FRICTION;
D O I：
10.1016/j.compositesb.2016.09.017
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This study evaluated the mechanical and thermal properties of aluminum alloy 2024 (Al2024) matrix composites reinforced with multi-walled carbon nanotube (MWCNT) or few-layered graphene (FLG) in the temperature range of 250-430 degrees C. The Al2024/MWCNT and Al2024/FLG composites were fabricated using powder metallurgy, and the associated microstructures were observed. At 350 degrees C, both composites maintain high yield stress about 110 MPa, since uniform dispersion of the nano-scale reinforcements has a strong interface, hinders the dislocation movement and eutectic phase coarsening and severe softening of the matrix. The composites also show a low thermal expansion coefficient of similar to 18 x 10(-6)/K. The results are respectively over similar to 2.5 times higher strength and similar to 20% lower CTE than those of commercial Al alloy used as piston material (AlSi12CuMgNi). (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码：66 / 73
页数：8
相关论文
共 46 条
  • [1] Fabrication of nano-sized Al2O3 reinforced casting aluminum composite focusing on preparation process of reinforcement powders and evaluation of its properties
    Akbari, M. Karbalaei
    Baharvandi, H. R.
    Mirzaee, O.
    [J]. COMPOSITES PART B-ENGINEERING, 2013, 55 : 426 - 432
  • [2] [Anonymous], LIFE CYCLE COST ANAL
  • [3] Comparative study of first- and second-order Raman spectra of MWCNT at visible and infrared laser excitation
    Antunes, E. F.
    Lobo, A. O.
    Corat, E. J.
    Trava-Airoldi, V. J.
    Martin, A. A.
    Verissimo, C.
    [J]. CARBON, 2006, 44 (11) : 2202 - 2211
  • [4] Association A., 2009, INT ALL DES CHEM COM
  • [5] Association A, 2000, AL STAND DAT
  • [6] Benedyk J.C., 2005, LIGHT MET AGE, V63, P36
  • [7] Optimization of AlSi-CNTs functionally graded material composites for engine piston rings
    Carvalho, O.
    Buciumeanu, M.
    Madeira, S.
    Soares, D.
    Silva, F. S.
    Miranda, G.
    [J]. MATERIALS & DESIGN, 2015, 80 : 163 - 173
  • [8] Mechanical and microstructural behaviour of 2024-7075 aluminium alloy sheets joined by friction stir welding
    Cavaliere, P
    Nobile, R
    Panella, FW
    Squillace, A
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2006, 46 (06) : 588 - 594
  • [9] FIBER-REINFORCED METAL-MATRIX COMPOSITES
    CHOU, TW
    KELLY, A
    OKURA, A
    [J]. COMPOSITES, 1985, 16 (03): : 187 - 206
  • [10] LIGHTWEIGHT MATERIALS FOR AUTOMOTIVE APPLICATIONS
    COLE, GS
    SHERMAN, AM
    [J]. MATERIALS CHARACTERIZATION, 1995, 35 (01) : 3 - 9
12345