Dimensional optimization of microchannel heat sinks with multiple heat sources

被引：35

作者：

Turkakar, Goker ^{[1
]}

Okutucu-Ozyurt, Tuba ^{[1
]}

机构：

[1] Middle E Tech Univ, Dept Mech Engn, ODTU, TR-06800 Ankara, Turkey

来源：

INTERNATIONAL JOURNAL OF THERMAL SCIENCES | 2012年 / 62卷

关键词：

Microchannel heat sink; Analytical optimization; Hot spot cooling; Thermal resistance minimization; Entrance effects; Variable properties; THERMAL PERFORMANCE; NUMERICAL OPTIMIZATION;

D O I：

10.1016/j.ijthermalsci.2011.12.015

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

Dimensional optimization of silicon microchannel heat sinks is performed by minimizing the total thermal resistance. Intel Core i7-900 Desktop Processor of chip core dimensions of 1.891 cm x 1.44 cm is considered as a reference processor which is reported to dissipate 130 W of heat. The properties are evaluated at the area weighted average of the fluid inlet and iteratively calculated outlet temperatures. The effects of the thermal and hydrodynamic entrance regions on heat transfer and flow are also investigated. The study is unique in that the optimization has been performed for localized multiple heat sources, as well as for a uniform heat load condition. The results of the optimization agreed very well with available ones in the literature. (C) 2011 Elsevier Masson SAS. All rights reserved.

引用

页码：85 / 92

页数：8

共 50 条

[41] OPTIMIZATION OF THE THERMAL PERFORMANCE OF MULTI-LAYER SILICON MICROCHANNEL HEAT SINKS
Xu, Shanglong
Wu, Yihao
Cai, Qiyu
Yang, Lili
Li, Yue
THERMAL SCIENCE, 2016, 20 (06): : 2001 - 2013
[42] On the local thermal equilibrium in microchannel heat sinks
Kim, SJ
Kim, D
Lee, DY
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2000, 43 (10) : 1735 - 1748
[43] Evaluation of Additively Manufactured Microchannel Heat Sinks
Collins, Ivel L.
Weibel, Justin A.
Pan, Liang
Garimella, Suresh V.
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 2019, 9 (03): : 446 - 457
[44] The optimum thermal design of microchannel heat sinks
Wen, ZM
Fah, CK
PROCEEDINGS OF THE 1997 1ST ELECTRONIC PACKAGING TECHNOLOGY CONFERENCE, 1997, : 123 - 129
[45] Cooling of microchannel heat sinks with gaseous coolants
Adham, Ahmed Mohammed
Mohd-Ghazali, Normah
Ahmad, Robiah
5TH BSME INTERNATIONAL CONFERENCE ON THERMAL ENGINEERING, 2013, 56 : 337 - 343
[46] Microchannel integrated heat sinks in silicon technology
Perret, C
Schaeffer, C
Boussey, J
CONFERENCE RECORD OF THE 1998 IEEE INDUSTRY APPLICATIONS CONFERENCE, VOLS 1-3, 1998, : 1051 - 1055
[47] Flow boiling in silicon microchannel heat sinks
Harirchian, Tannaz
Garimella, Suresh V.
TWENTY FOURTH ANNUAL IEEE SEMICONDUCTOR THERMAL MEASUREMENT AND MANAGEMENT SYMPOSIUM, PROCEEDINGS 2008, 2008, : 1 - 8
[48] Additive manufacturing for producing microchannel heat sinks
Kivanani, A. N.
Khalilpourazary, S.
Mobadersani, F.
PROGRESS IN ADDITIVE MANUFACTURING, 2025, 10 (01) : 231 - 245
[49] Analysis of microchannel heat sinks, for electronics cooling
Zhao, CY
Lu, TJ
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2002, 45 (24) : 4857 - 4869
[50] Manifold microchannel heat sinks: Isothermal analysis
Copeland, D
Behnia, M
Nakayama, W
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY PART A, 1997, 20 (02): : 96 - 102

← 1 2 3 4 5 →