A Vibration Signal-Based Method for Fault Identification and Classification in Hydraulic Axial Piston Pumps

被引:44
作者
Casoli, Paolo [1 ]
Pastori, Mirko [1 ]
Scolari, Fabio [1 ]
Rundo, Massimo [2 ]
机构
[1] Univ Parma, Dept Engn & Architecture, I-43121 Parma, Italy
[2] Politecn Torino, Dept Energy, Cso Duca Abruzzi 24, I-10129 Turin, Italy
关键词
fault detection; hydraulic pumps; vibration; condition monitoring; DIAGNOSIS; CAVITATION; CYCLOSTATIONARITY; INFORMATION; PRINCIPLES; GEAR;
D O I
10.3390/en12050953
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
In recent years, the interest of industry towards condition-based maintenance, substituting traditional time-based maintenance, is growing. Indeed, condition-based maintenance can increase the system uptime with a consequent economic advantage. In this paper, a solution to detect the health state of a variable displacement axial-piston pump based on vibration signals is proposed. The pump was tested on the test bench in different operating points, both in healthy and faulty conditions, the latter obtained by assembling damaged components in the pump. The vibration signals were acquired and exploited to extract features for fault identification. After the extraction, the obtained features were reduced to decrease the computational effort and used to train different types of classifiers. The classification algorithm that presents the greater accuracy with reduced features was identified. The analysis has also showed that using the time sampling raw signal, a satisfying accuracy could be obtained, which will permit onboard implementation. Results have shown the capability of the algorithm to identify which fault occurred in the system (fault identification) for each working condition. In future works, the classification algorithm will be implemented onboard to validate its effectiveness for the online identification of the typical incipient faults in axial-piston pumps.
引用
收藏
页数:18
相关论文
共 46 条
[1]   Detection of incipient cavitation and determination of the best efficiency point for centrifugal pumps using acoustic emission [J].
Alfayez, L ;
Mba, D .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2005, 219 (E4) :327-344
[2]  
[Anonymous], 1998, THESIS
[3]   Blind separation of vibration components: Principles and demonstrations [J].
Antoni, J .
MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2005, 19 (06) :1166-1180
[4]   Cyclostationary modelling of rotating machine vibration signals [J].
Antoni, J ;
Bonnardot, F ;
Raad, A ;
El Badaoui, M .
MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2004, 18 (06) :1285-1314
[5]   Differential diagnosis of gear and bearing faults [J].
Antoni, J ;
Randall, RB .
JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, 2002, 124 (02) :165-171
[6]  
Antoni J, 2002, J SOUND VIB, V257, P839, DOI [10.1006/jsvi.2002.5063, 10.1006/jsvi.5063]
[7]  
Antoni J, 2002, J SOUND VIB, V257, P815, DOI 10.1006/jsvi.5062
[8]   A fuzzy inference system for pump failure diagnosis to improve maintenance process: The case of a petrochemical industry [J].
Azadeh, A. ;
Ebrahimipour, V. ;
Bavar, P. .
EXPERT SYSTEMS WITH APPLICATIONS, 2010, 37 (01) :627-639
[9]  
Backas J., 2011, P 12 SCAND INT C FLU
[10]   Integration of heterogeneous information in SHM models [J].
Bartram, Gregory ;
Mahadevan, Sankaran .
STRUCTURAL CONTROL & HEALTH MONITORING, 2014, 21 (03) :403-422