Strengthening of σ phase in a Fe20Cr9Ni cast austenite stainless steel

被引:18
|
作者
Wang, Y. Q. [1 ,2 ]
Han, J. [1 ]
Yang, B. [1 ]
Wang, X. T. [1 ]
机构
[1] Univ Sci & Technol Beijing, State Key Lab Adv Met & Mat, Beijing 100083, Peoples R China
[2] Anhui Univ Technol, Sch Mat Sci & Engn, Maanshan 243002, Anhui, Peoples R China
关键词
Cast austenite stainless steel; Yield and ultimate tensile strengths; sigma phase; In situ tensile test; MECHANICAL-PROPERTIES; CREEP-PROPERTIES; PRECIPITATION; DUCTILITY; CORROSION;
D O I
10.1016/j.matchar.2013.07.019
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The strengthening mechanism of a phase in a Fe20Cr9Ni cast austenite stainless steel used for primary coolant pipes of nuclear power plants has been investigated. The yield and ultimate tensile strengths of aged specimens increased comparing with those of the unaged ones. It was found that the increase of strengths is due to the hard and brittle (sigma + gamma(2)) structure which decomposed from a phase in the steel. Fracture surfaces of specimens-after in situ tensile test showed that the inhibition of (sigma + gamma(2)) structure on the dislocation movements was more significant than ferrite although cracks started predominately at sigma/gamma(2) interfaces. The (sigma + gamma(2)) structure behaves like a fiber reinforced composite material. (C) 2013 Elsevier Inc. All rights reserved.
引用
收藏
页码:120 / 125
页数:6
相关论文
共 50 条
  • [41] Exceptional Phase-Transformation Strengthening of Fe50Mn20Cr20Ni10 Medium-Entropy Alloys at Cryogenic Temperature
    Wang, Zhong
    Qin, Mingjie
    Zhang, Min
    Yang, Huijun
    Qiao, Junwei
    Wang, Zhihua
    METALS, 2022, 12 (04)
  • [42] Research of the bonded interface of Cu9Al4Fe/1Cr18Ni9Ti stainless steel bimetallic composite
    Zou, Juntao
    Li, Silin
    Wei, Yanni
    Liang, Shuhua
    VACUUM, 2017, 146 : 266 - 273
  • [43] The phase stability in Cr-Ni and Cr-Mn duplex stainless steels
    Calliari, I.
    Pellizzari, M.
    Zanellato, M.
    Ramous, E.
    JOURNAL OF MATERIALS SCIENCE, 2011, 46 (21) : 6916 - 6924
  • [44] Influence of Austenitization Parameters on the Precipitation Sequence and the Chemical Homogenization of Austenite in a High-Performance Fe-Ni-Cr-Al-Ti-Mo Stainless Maraging Steel
    Ancey-Rocchi, Stella
    Vidal, Vanessa
    Poulain, Thibault
    Billot, Thomas
    Bechet, Denis
    Binot, Nicolas
    Huleux, Vincent
    Dehmas, Moukrane
    Delagnes, Denis
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2021, 52 (10): : 4623 - 4635
  • [45] Atomic resolution characterization of strengthening nanoparticles in a new high-temperature-capable 43Fe-25Ni-22.5Cr austenitic stainless steel
    Heczko, M.
    Esser, B. D.
    Smith, T. M.
    Beran, P.
    Mazanova, V.
    McComb, D. W.
    Kruml, T.
    Polak, J.
    Mills, M. J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 719 : 49 - 60
  • [46] Effect of Titanium Addition on As-Cast Structure and High-Temperature Tensile Property of 20Cr-8Ni Stainless Steel for Heavy Castings
    Wang, Qiming
    Cheng, Guoguang
    Hou, Yuyang
    METALS, 2020, 10 (04)
  • [47] Influences of cooling rates on solidification and segregation characteristics of Fe-Cr-Ni-Mo-N super austenitic stainless steel
    Hao, Yansen
    Li, Jian
    Li, Xin
    Liu, Wanchun
    Cao, Guangming
    Li, Chenggang
    Liu, Zhenyu
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2020, 275
  • [48] Structural refinement and property optimization in an Fe-23Cr-8.5Ni duplex stainless steel
    Xie, L.
    Huang, T. L.
    Wang, Y. H.
    Zhang, L.
    Wu, G. L.
    Tsuji, N.
    Huang, X.
    38TH RISO INTERNATIONAL SYMPOSIUM ON MATERIALS SCIENCE, 2017, 219
  • [49] Phase transformations of 24Cr-14Ni-0.7Si stainless steel under different aging conditions
    Hsieh, Chih-Chun
    Lin, Dong-Yih
    METALS AND MATERIALS INTERNATIONAL, 2010, 16 (02) : 155 - 162
  • [50] Effect of copper addition on tensile behavior in Fe-Cr-Ni stable austenitic stainless steel
    Cho, Hyung-Jun
    Kim, Sung-Ho
    Cho, Yeonggeun
    Kim, Sung-Joon
    MATERIALS CHARACTERIZATION, 2022, 190