Strengthening of σ phase in a Fe20Cr9Ni cast austenite stainless steel

被引:18
|
作者
Wang, Y. Q. [1 ,2 ]
Han, J. [1 ]
Yang, B. [1 ]
Wang, X. T. [1 ]
机构
[1] Univ Sci & Technol Beijing, State Key Lab Adv Met & Mat, Beijing 100083, Peoples R China
[2] Anhui Univ Technol, Sch Mat Sci & Engn, Maanshan 243002, Anhui, Peoples R China
关键词
Cast austenite stainless steel; Yield and ultimate tensile strengths; sigma phase; In situ tensile test; MECHANICAL-PROPERTIES; CREEP-PROPERTIES; PRECIPITATION; DUCTILITY; CORROSION;
D O I
10.1016/j.matchar.2013.07.019
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The strengthening mechanism of a phase in a Fe20Cr9Ni cast austenite stainless steel used for primary coolant pipes of nuclear power plants has been investigated. The yield and ultimate tensile strengths of aged specimens increased comparing with those of the unaged ones. It was found that the increase of strengths is due to the hard and brittle (sigma + gamma(2)) structure which decomposed from a phase in the steel. Fracture surfaces of specimens-after in situ tensile test showed that the inhibition of (sigma + gamma(2)) structure on the dislocation movements was more significant than ferrite although cracks started predominately at sigma/gamma(2) interfaces. The (sigma + gamma(2)) structure behaves like a fiber reinforced composite material. (C) 2013 Elsevier Inc. All rights reserved.
引用
收藏
页码:120 / 125
页数:6
相关论文
共 50 条
  • [1] The characterization of G-phase in Fe20Cr9Ni cast duplex stainless steel
    Chen, Yuefeng
    Dai, Xin
    Chen, Xudong
    Yang, Bin
    MATERIALS CHARACTERIZATION, 2019, 149 : 74 - 81
  • [2] Effect of ferrite on pitting corrosion of Fe20Cr9Ni cast austenite stainless steel for nuclear power plant pipe
    Wang, Y. Q.
    Li, N.
    Yang, B.
    CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2015, 50 (04) : 330 - 337
  • [3] Evaluation of pitting corrosion in duplex stainless steel Fe20Cr9Ni for nuclear power application
    Chen, Yuefeng
    Yang, Bin
    Zhou, Yangtao
    Wu, Yuan
    Zhu, Huihui
    ACTA MATERIALIA, 2020, 197 : 172 - 183
  • [4] Comparative Study on Microstructure and Properties of the Cr-Mn-Ni Stainless Steel and the Cr-Ni Stainless Steel
    Tang, Peng
    Liu, Qian-nan
    Yang, Xue-xuan
    PHYSICS OF METALS AND METALLOGRAPHY, 2022, 123 (14): : 1557 - 1565
  • [5] Cryorolling effect on microstructure and mechanical properties of Fe-25Cr-20Ni austenitic stainless steel
    Xiong, Yi
    He, Tiantian
    Wang, Junbei
    Lu, Yan
    Chen, Lufei
    Ren, Fengzhang
    Liu, Yuliang
    Volinsky, Alex A.
    MATERIALS & DESIGN, 2015, 88 : 398 - 405
  • [6] Additive manufacturing of an Fe-Cr-Ni-Al maraging stainless steel: Microstructure evolution, heat treatment, and strengthening mechanisms
    Hadadzadeh, Amir
    Shahriari, Ayda
    Amirkhiz, Babak Shalchi
    Li, Jian
    Mohammadi, Mohsen
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 787
  • [7] Serrated yielding in an advanced stainless steel Fe-25Ni-20Cr (wt%)
    Alomari, Abdullah S.
    Kumar, N.
    Murty, K. L.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 751 : 292 - 302
  • [8] High-Temperature Deformability of a Fe-Cr-Mn-Ni Austenite Stainless Steel with High Nitrogen and High Carbon Contents
    Lee, Byung Ju
    Song, Jae Sook
    Hong, Sun Ig
    METALS, 2018, 8 (08):
  • [9] Conditions for the Efficient Crushing of the As-Cast Microstructure of 30Cr10Ni Duplex Stainless Steel
    Tercelj, Milan
    Fazarinc, Matevz
    Bombac, David
    Kugler, Goran
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2010, 41 (06): : 1328 - 1337
  • [10] Variation of the Reversed Austenite Amount with the Tempering Temperature in a Fe-13%Cr-4%Ni-Mo Martensitic Stainless Steel
    Song, Yuanyuan
    Li, Xiuyan
    Yin, Fuxing
    Ping, Dehai
    Rong, Lijian
    Li, Yiyi
    ENERGY AND ENVIRONMENT MATERIAL S, 2010, 650 : 193 - +