Deformation twins - probable inherent nuclei of cleavage fracture in ferritic steels

被引：44

作者：

Bosansky, J ^{[1
]}

Smida, T ^{[1
]}

机构：

[1] Welding Res Inst, Bratislava 83259, Slovakia

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2002年 / 323卷 / 1-2期

关键词：

deformation twinning; ductile -brittle transition temperature; cleavage crack initiation; mechanism of cleavage fracture; ferritic steels;

D O I：

10.1016/S0921-5093(01)01350-8

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The vicinity of cleavage fracture of ferritic structural steels was analyzed. A strong tendency to deformation twinning was observed in the vicinity of the main cleavage crack. Numerous cleavage nuclei were revealed on the twins in the close vicinity of cleavage facets. It is concluded that deformation twinning represents an integral part of the deformation processes in the region of the propagating cleavage crack tip and that the deformation twins, which nucleate in front of the crack tip act as nucleation sites for cleavage fracture nuclei - pre-cleavage microcracks (PCMC). The size of PCMCs corresponds to that of the assumed inherent cleavage crack nuclei predicted by brittle/cleavage fracture theory. However, such nuclei have not hitherto been observed in ferritic materials. (C) 2002 Elsevier Science B.V. All rights reserved.

引用

页码：198 / 205

页数：8

共 19 条

[1] THE DEFORMATION AND FRACTURE OF ALPHA-IRON AT LOW TEMPERATURES
BIGGS, WD
PRATT, PL
[J]. ACTA METALLURGICA, 1958, 6 (11): : 694 - 703
[2] Transonic twinning from the crack tip
Cerv, J
Landa, M
Machová, A
[J]. SCRIPTA MATERIALIA, 2000, 43 (05) : 423 - 428
[3] Finkel' V. M., 1970, Fizika Metallov i Metallovedenie, V29, P1248
[4] FINNIE I, 1990, T ASME, V112, P56
[5] ELASTIC-PLASTIC STRESS ANALYSIS FOR A NOTCHED BAR IN PLANE STRAIN BENDING
GRIFFITHS, JR
OWEN, DRJ
[J]. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 1971, 19 (06) : 419 - +
[6] Dislocations faster than the speed of sound
Gumbsch, P
Gao, H
[J]. SCIENCE, 1999, 283 (5404) : 965 - 968
[7] Driving force and nucleation of supersonic dislocations
Gumbsch, P
Gao, HJ
[J]. JOURNAL OF COMPUTER-AIDED MATERIALS DESIGN, 1999, 6 (2-3): : 137 - 144
[8] THE INFLUENCE OF MICROSTRUCTURE ON BRITTLE-FRACTURE TOUGHNESS
HAHN, GT
[J]. METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1984, 15 (06): : 947 - 959
[9] HIRSCH PB, 1989, MATER T JIM, V30, P841
[10] TWINNING AND FRACTURE OF SINGLE CRYSTALS OF 3-PERCENT SILICON IRON
HULL, D
[J]. ACTA METALLURGICA, 1960, 8 (01): : 11 - 18

← 1 2 →