Tribological behaviour of PVD coatings for sheet metal forming tools: laboratory and industrial evaluation

In the last decades, Physical Vapour Deposition (PVD) and Chemical Vapour Deposition (CVD) processes have been significantly improved and optimized for the applications on dies for sheet metal forming processes. However, due to the different contact conditions at dies-blank interfaces, and the wide range of applied contact pressures, the selection of the correct coating may be still affected by trials-and-error approaches. Although many methods to evaluate the tribological performances of such coatings can be found in scientific literature, they often suffer of limitations in reproducing the interface conditions typical of industrial processes. The objective of the present research work is to investigate the tribological behaviour of two coatings deposited by PVD magnetron sputtering technique. Both investigations in laboratory and industrial conditions were performed: the former to evaluate their tribological characteristics, the latter to test the performances of coatings in production lines. The results, in terms of wear resistance, outline the comparison of the new technology with the performances of traditional dies.