THE EFFECT OF TECHNOLOGICAL PARAMETERS ON THE STRUCTURE AND PROPERITIES OF COLD SINTERED IRON

被引：0

作者：

Duric, Milutin ^{[1
]}

Acimovic-Pavlovic, Zagorka ^{[2
]}

Duricic, Milan ^{[1
]}

机构：

[1] UNION Univ Belgrade, Fac Ind Management, Krusevac, Serbia

[2] Univ Belgrade, Fac Technol & Met, Belgrade 11000, Serbia

来源：

METALURGIA INTERNATIONAL | 2012年 / 17卷 / 07期

关键词：

cold sintering; Destaloy AE; structure; properties; POWDER-METALLURGY; PARTS;

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

This study researched alloyed iron (type Distaloy AE with high nickel content) consolidation by the cold sintering process with the aim to find the fundamental relation between the technology, strukcture and properties. The dependence of the microstructure formation on the pressing conditions and the cold sintering of iron within the pressing range from 4 to 12 GPa was studied in detail. Research of certain phenomenons and process that characterize material consolidation by cold sintering, explanation of their dependence on the material structure was conducted in the aim of creating conditions for synthesis of new materials and products with previously assigned properties. The resulted pressings were subject to the following testing: microstructural (light and scanning microscopy, micro-hardness testing), electrical and mechanical properties.

引用

页码：5 / 9

页数：5

共 50 条

[1] THE EFFECT OF TECNOLOGICAL PARAMETERS ON THE STRUCTURE AND PROPERTIES OF COLD SINTERED IRON
Duricic, Milutin R.
Acimovic-Pavlovic, Zagorka S.
METALLURGICAL & MATERIALS ENGINEERING-ASSOCIATION OF METALLURGICAL ENGINEERS OF SERBIA, 2006, 12 (01): : 3 - 16
[2] The correlation of technological parameters and the structure of cold sintered iron as a basis for material property prognosis
Djuricic, Milutin R.
Acimovic-Pavlovic, Zagorka S.
Andric, Ljubisa D.
MATERIALS LETTERS, 2006, 60 (28) : 3390 - 3393
[3] Effect of low-temperature plasma carburizing on surface topography, mechanical and tribological properties of sintered iron and nitrided sintered iron
Lamim, Thiago de Souza
Anselmo, Leticia Maria
Bendo, Tatiana
Bernardelli, Euclides Alexandre
Binder, Cristiano
Klein, Aloisio Nelmo
Biasoli de Mello, Jose Daniel
TRIBOLOGY INTERNATIONAL, 2022, 168
[4] Fabrication of cold sintered soft magnetic composites using oxalate coated iron powders
Foster, L.
Altaf, N.
Gray, Jennifer
Waryoba, D.
Rajagopalan, R.
MATERIALS CHEMISTRY AND PHYSICS, 2024, 321
[5] Iron Effect on the Tribotechnical Properties of Sintered Al–Sn Alloys
N. M. Rusin
A. L. Skorentsev
I. V. Vlasov
Journal of Friction and Wear, 2022, 43 : 330 - 338
[6] The Influence of Technological Parameters on the Structure and Properties of the Al-Cu-Mg-Si Alloy Obtained Using Selective Laser Melting
Petrova, A. N.
Klenov, A. I.
Brodova, I. G.
Rasposienko, D. Yu.
Pil'shchikov, A. A.
Orlova, N. Yu.
PHYSICS OF METALS AND METALLOGRAPHY, 2023, 124 (10) : 1017 - 1025
[7] The effect of liquid phase chemistry on the densification and strength of cold sintered ZnO
Jabr, Abdullah
Fanghanel, Julian
Fan, Zhongming
Bermejo, Raul
Randall, Clive
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2023, 43 (04) : 1531 - 1541
[8] Variation in the structure and properties of sintered alloys under the effect of nanodimensional carbon additives
Vityaz', P. A.
Zhornik, V. I.
Kovaleva, S. A.
Kukareko, V. A.
RUSSIAN JOURNAL OF NON-FERROUS METALS, 2016, 57 (02) : 135 - 140
[9] Variation in the structure and properties of sintered alloys under the effect of nanodimensional carbon additives
P. A. Vityaz’
V. I. Zhornik
S. A. Kovaleva
V. A. Kukareko
Russian Journal of Non-Ferrous Metals, 2016, 57 : 135 - 140
[10] Effect of Cold-Sintering Parameters on Structure, Density, and Topology of Fe-Cu Nanocomposites
Tsukanov, Alexey
Ivonin, Dmitriy
Gotman, Irena
Gutmanas, Elazar Y.
Grachev, Eugene
Peryikov, Aleksandr
Lerner, Marat
MATERIALS, 2020, 13 (03)

← 1 2 3 4 5 →