Dynamic modelling and stabilization of a new configuration of two-wheeled machines

被引:25
作者
Almeshal, A. M. [1 ]
Goher, K. M. [2 ]
Tokhi, M. O. [1 ]
机构
[1] Univ Sheffield, Dept Automat Control & Syst Engn, Sheffield S10 2TN, S Yorkshire, England
[2] Sultan Qaboos Univ, Dept Mech & Ind Engn, Muscat, Oman
关键词
Lagrangian formulation; Modelling; Simulation; Double inverted pendulum; INVERTED PENDULUM; FUZZY CONTROL; STABILITY;
D O I
10.1016/j.robot.2013.01.006
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
This paper presents a novel design of two-wheeled vehicles and an associated stabilization approach. The proposed design provides the vehicle with more flexibility in terms of increased degrees of freedom which enable the vehicle to enlarge its working space. The additional translational degree of freedom (DOF), offered by the linear actuator, assists an attached payload to reach different levels of height as and when required. The model of the system mimics the scenario of the double inverted pendulum on a moving base, with the added DOF. Lagrangian dynamic formulation is used to derive the system dynamics. Joints frictions based on the Coulomb friction model are considered so as to retain nonlinear characteristics of the system. A PD-PID robust control approach is derived for the stabilization of the system. An investigation of the impact of damping associated with joints on the stability of the system is carried out. Simulation results validating the model and the control approach are presented and discussed. (C) 2013 Elsevier B.V. All rights reserved.
引用
收藏
页码:443 / 472
页数:30
相关论文
共 53 条
[31]   Nonlinear Model Predictive Control of an Inverted Pendulum [J].
Mills, Adam ;
Wills, Adrian ;
Ninness, Brett .
2009 AMERICAN CONTROL CONFERENCE, VOLS 1-9, 2009, :2335-2340
[32]   Swinging up and stabilization of a real inverted pendulum [J].
Muskinja, N ;
Tovornik, B .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2006, 53 (02) :631-639
[33]  
Nundrakwang S, 2005, P 5 INT C INF COMM S, P488
[34]  
Qi Q., 2008, P 2008 2 INT S SYSTE, P1, DOI [10.1109/ISSCAA.2008.4776376, DOI 10.1109/ISSCAA.2008.4776376]
[35]  
Qiang S, 2008, IEEE INTL CONF IND I, P445
[36]  
Shimizu Yuta, 2010, Proceedings of the 11th IEEE International Workshop on Advanced Motion Control (AMC 2010), P234, DOI 10.1109/AMC.2010.5463993
[37]   Self-Erecting Inverted Pendulum Employing PSO for Stabilizing and Tracking Controller [J].
Solihin, Mahmud Iwan ;
Akmeliawati, Rini .
CSPA: 2009 5TH INTERNATIONAL COLLOQUIUM ON SIGNAL PROCESSING AND ITS APPLICATIONS, PROCEEDINGS, 2009, :63-68
[38]  
Su-Ying Zhang, 2010, 2010 International Conference on Computer and Communication Technologies in Agriculture Engineering (CCTAE 2010), P300, DOI 10.1109/CCTAE.2010.5543607
[39]   Modern control approach for robotic wheelchair with inverse pendulum control [J].
Takahashi, Y ;
Tsubouchi, O .
5TH INTERNATIONAL CONFERENCE ON INTELLIGENT SYSTEMS DESIGN AND APPLICATIONS, PROCEEDINGS, 2005, :364-369
[40]  
Takahashi Y, 2003, IROS 2003: PROCEEDINGS OF THE 2003 IEEE/RSJ INTERNATIONAL CONFERENCE ON INTELLIGENT ROBOTS AND SYSTEMS, VOLS 1-4, P3618