The path towards efficient wide band gap thin-film kesterite solar cells with transparent back contact for viable tandem application

被引:18
作者
Khelifi, Samira [1 ,2 ]
Brammertz, Guy [3 ,4 ,5 ]
Choubrac, Leo [6 ,8 ]
Batuk, Maria [7 ]
Yang, Sheng [1 ]
Meuris, Marc [3 ,4 ,5 ]
Barreau, Nicolas [6 ]
Hadermann, Joke [7 ]
Vrielinck, Henk [2 ]
Poelman, Dirk [2 ]
Neyts, Kristiaan [1 ]
Vermang, Bart [3 ,4 ,5 ]
Lauwaert, Johan [1 ]
机构
[1] Univ Ghent, Dept Elect & Informat Syst ELIS, iGhent Tower,Technol Pk Zwijnaarde 126, B-9052 Ghent, Belgium
[2] Univ Ghent, Dept Solid State Sci, Krijgslaan S1, B-9000 Ghent, Belgium
[3] Imec Div IMOMEC Partner Solliance, Wetenschapspk 1, B-3590 Diepenbeek, Belgium
[4] Hasselt Univ Partner Solliance, Martelarenlaan 42, B-3500 Hasselt, Belgium
[5] EnergyVille, Thorpk 8320, B-3600 Genk, Belgium
[6] Univ Nantes, Inst Mat Jean Rouxel IMN, CNRS, 2 Rue Houssiere,BP 32229, F-44322 Nantes 03, France
[7] Univ Antwerp, Electron Microscopy Mat Sci EMAT, Groenenborgerlaan 171, B-2020 Antwerp, Belgium
[8] Helmoltz Zentrum Berlin Mat & Energie, Dept Struct & Dynam Energy Mat, D-14109 Berlin, Germany
关键词
Kesterite thin film solar cell; Cu2ZnGeSe4; Secondary/ternary phases; Wide band gap absorbers; Efficiency limitations; Four-terminal tandem solar cell; c-Si solar Cell; CU2ZNSNS4; CHALCOGENIDES; SIMULATION; SODIUM; OXIDES; MOSE2; NA;
D O I
10.1016/j.solmat.2020.110824
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Wide band gap thin-film kesterite solar cell based on non-toxic and earth-abundant materials might be a suitable candidate as a top cell for tandem configuration in combination with crystalline silicon as a bottom solar cell. For this purpose and based on parameters we have extracted from electrical and optical characterization techniques of Cu2ZnGeSe4 absorbers and solar cells, a model has been developed to describe the kesterite top cell efficiency limitations and to investigate the different possible configurations with transparent back contact for fourterminal tandem solar cell application. Furthermore, we have studied the tandem solar cell performance in view of the band gap and the transparency of the kesterite top cell and back contact engineering. Our detailed analysis shows that a kesterite top cell with efficiency > 14%, a band gap in the range of 1.5-1.7 eV and transparency above 80% at the sub-band gaps photons energies are required to achieve a tandem cell with higher efficiency than with a single silicon solar cell.
引用
收藏
页数:13
相关论文
共 65 条
  • [1] Origin of Crossover in Current Density-Voltage Characteristics of Cu(In,Ga)Se2 Thin Film Solar Cell Fabricated Using Lift-Off Process
    Abe, Yasuhiro
    Minemoto, Takashi
    Takakura, Hideyuki
    [J]. JAPANESE JOURNAL OF APPLIED PHYSICS, 2011, 50 (04)
  • [2] Formation and characterisation of MoSe2 for Cu(In,Ga)Se2 based solar cells
    Abou-Ras, D
    Kostorz, G
    Bremaud, D
    Kälin, M
    Kurdesau, FV
    Tiwari, AN
    Döbeli, M
    [J]. THIN SOLID FILMS, 2005, 480 : 433 - 438
  • [3] Back Contact Engineering for Increased Performance in Kesterite Solar Cells
    Antunez, Priscilla D.
    Bishop, Douglas M.
    Lee, Yun Seog
    Gokmen, Tayfun
    Gunawan, Oki
    Gershon, Talia S.
    Todorov, Teodor K.
    Singh, Saurabh
    Haight, Richard
    [J]. ADVANCED ENERGY MATERIALS, 2017, 7 (15)
  • [4] Low band gap liquid-processed CZTSe solar cell with 10.1% efficiency
    Bag, Santanu
    Gunawan, Oki
    Gokmen, Tayfun
    Zhu, Yu
    Todorov, Teodor K.
    Mitzi, David B.
    [J]. ENERGY & ENVIRONMENTAL SCIENCE, 2012, 5 (05) : 7060 - 7065
  • [5] Advanced electrical simulation of thin film solar cells
    Burgelman, Marc
    Decock, Koen
    Khelifi, Samira
    Abass, Aimi
    [J]. THIN SOLID FILMS, 2013, 535 : 296 - 301
  • [6] Impact of Na on MoSe2 formation at the CIGSe/Mo interface in thin-film solar cells on polyimide foil at low process temperatures
    Caballero, R.
    Nichterwitz, M.
    Steigert, A.
    Eicke, A.
    Lauermann, I.
    Schock, H. W.
    Kaufmann, C. A.
    [J]. ACTA MATERIALIA, 2014, 63 : 54 - 62
  • [7] Classification of Lattice Defects in the Kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 Earth-Abundant Solar Cell Absorbers
    Chen, Shiyou
    Walsh, Aron
    Gong, Xin-Gao
    Wei, Su-Huai
    [J]. ADVANCED MATERIALS, 2013, 25 (11) : 1522 - 1539
  • [8] Sn Substitution by Ge: Strategies to Overcome the Open-Circuit Voltage Deficit of Kesterite Solar Cells
    Choubrac, Leo
    Baer, Marcus
    Kozina, Xeniya
    Felix, Roberto
    Wilks, Regan G.
    Brammertz, Guy
    Levcenko, Sergiu
    Arzel, Ludovic
    Barreau, Nicolas
    Harel, Sylvie
    Meuris, Marc
    Vermang, Bart
    [J]. ACS APPLIED ENERGY MATERIALS, 2020, 3 (06) : 5830 - 5839
  • [9] 7.6% CZGSe Solar Cells Thanks to Optimized CdS Chemical Bath Deposition
    Choubrac, Leo
    Brammertz, Guy
    Barreau, Nicolas
    Arzel, Ludovic
    Harel, Sylvie
    Meuris, Marc
    Vermang, Bart
    [J]. PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 2018, 215 (13):
  • [10] Sulfurization of co-evaporated Cu2ZnSnSe4 thin film solar cells: The role of Na
    de la Cueva, L.
    Sanchez, Y.
    Calvo-Barrio, L.
    Oliva, F.
    Izquierdo-Roca, V.
    Khelifi, S.
    Bertram, T.
    Merino, J. M.
    Leon, M.
    Caballero, R.
    [J]. SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2018, 186 : 115 - 123