A method to determine the optimal water injection intensity based on oil production rate and water cut

被引：1
|
作者：
Zhang, Jicheng [1 ]
Jia, Ying [1 ]
Cui, Xiaona [1 ]
机构：
[1] Northeast Petr Univ, Minist Educ China Enhanced Oil & Gas Recovery, Key Lab, Daqing 163318, Peoples R China
来源：
ADVANCES IN INDUSTRIAL AND CIVIL ENGINEERING, PTS 1-4 | 2012年 / 594-597卷
关键词：
Oil production rate; Water cut; Water injection intensity; Numerical simulation;
D O I：
10.4028/www.scientific.net/AMR.594-597.2442
中图分类号：
X [环境科学、安全科学];
学科分类号：
08 ; 0830 ;
摘要：
Water injection is one of the important ways to maintain reservoir pressure and improving the oilfield development effect. And separate zone water injection is the main technology in water flooding oilfield. The optimal water intensity which has been allocated plays an important role in all kinds of reservoir. This paper proposed a method to optimize the water injection intensity based on oil production rate and water cut. Conceptual model was constructed on the basis of real reservoir. By numerical simulation, a chart board was derived which describes the relationship of water injection intensity versus oil production rate and water cut. Using this chart, we can determine the optimal water injection intensity on different oil production rate and water cut.
引用
收藏
页码：2442 / 2445
页数：4
相关论文
共 50 条
  • [1] Simple method estimates the variation of oil production rate with oil-water viscosity ratio and water injection rate
    Bahadori, Alireza
    INTERNATIONAL JOURNAL OF OIL GAS AND COAL TECHNOLOGY, 2013, 6 (04) : 477 - 484
  • [2] Asynchronous Injection-Production Method in the High Water Cut Stage of Tight Oil Reservoirs
    Chen, Jianwen
    Cai, Dingning
    Zhang, Tao
    Yu, Linjun
    Zhou, Dalin
    Cheng, Shiqing
    ENERGIES, 2024, 17 (19)
  • [3] Applying BP Neural Network to Determine Proper Water Injection Intensity of Water Drive Oil Field
    Shan Wuyi
    Cui Weilin
    Li Yongsheng
    RESOURCES AND SUSTAINABLE DEVELOPMENT, PTS 1-4, 2013, 734-737 : 1358 - 1361
  • [4] A novel method to calculate the increasing rate of water cut in water flooding oil reservoirs
    Zhang, Hongyou
    Wang, Yuejie
    Wang, Meinan
    Deng, Qi
    Zhang, Yanhui
    GEOSYSTEM ENGINEERING, 2023, 26 (03) : 67 - 74
  • [5] An analytical method for calculating water cut of producers in injection-production pattern
    Xu, Hanbing
    Li, Xiangfang
    Shi, Depei
    Chen, Guijun
    Zhang, Qiang
    Shiyou Xuebao/Acta Petrolei Sinica, 2010, 31 (03): : 471 - 474
  • [6] Research on reasonable injection-production ratio of water flooding in the high water cut stage of Lamadian oil field
    Dong, Xiaoshuang
    PROCEEDINGS OF THE 2017 4TH INTERNATIONAL CONFERENCE ON EDUCATION, MANAGEMENT AND COMPUTING TECHNOLOGY (ICEMCT 2017), 2017, 101 : 81 - 84
  • [7] Influences of the Water Cut of Pumping Oil and the Mineralization of the Associated Water on the Rate of Sludging
    Vyatkin, Kirill
    Mordvinov, Victor
    Ilushin, Pavel
    Kozlov, Anton
    APPLIED SCIENCES-BASEL, 2021, 11 (15):
  • [8] Reasonable water injection rate calculation for water flooding reservoirs at different water-cut stages
    Yang, Yanming
    Su, Jiandong
    Ma, Peishen
    Shiyou Kan Tan Yu Kai Fa/Petroleum Exploration and Development, 25 (03): : 69 - 71
  • [9] A Proposed Method for Simulation of Rate-Controlled Production Valves for Reduced Water Cut
    Moradi, Ali
    Moldestad, Britt M. E.
    SPE PRODUCTION & OPERATIONS, 2021, 36 (03): : 669 - 684
  • [10] Methodology for production logging in oil-in-water flows under low flow rate and high water-cut conditions
    Wang, Da-Yang
    Jin, Ning-De
    Zhai, Lu-Sheng
    Ren, Ying-Yu
    He, Yuan-Sheng
    APPLIED GEOPHYSICS, 2019, 16 (03) : 302 - 313
12345