Streamers and Partial Discharge Mechanisms in Silicone Gel Under Impulse and AC Voltages

Silicone gels are widely used to encapsulate power electronics modules. The objective of this paper is to study the partial discharge (PD) mechanism in a silicone gel, using electrical measurements and fast visualization. Experiments are carried out in a point-plane geometry, using either impulse voltage or ac. Under impulse voltage, the visualization shows that the first discharges recorded in a new sample are due to the initiation and propagation of "streamers", with features close to those previously reported in viscous liquids. Under ac, a stable PD regime rapidly establishes: a streamer creates a cavity with a long lifetime, and PDs occur in this cavity during the subsequent ac waves. Since slow streamers develop during long times (some ms), classical PD measurements do not provide an adequate evaluation of the actual discharge magnitude: very small PDs (1 pC) are recorded, whereas large cavities with a total charge in excess of 10 pC are actually present in the gel. When PDs are repeated permanent degradations of the gel rapidly occur, showing the limited self-healing capabilities of silicone gels.