Study of Low Detonation Velocity Explosives Used in Explosion Welding

被引：1
作者：
Huang, Wenyao [1 ]
Yuan, Shengfang [2 ]
Wu, Hongbo [1 ]
机构：
[1] Anhui Univ Sci & Technol, Sch Chem Engn, Huainan 232001, Anhui, Peoples R China
[2] Liming Res Inst chem Ind, Henan 471001, Peoples R China
来源：
BIOTECHNOLOGY, CHEMICAL AND MATERIALS ENGINEERING, PTS 1-3 | 2012年 / 393-395卷
关键词：
Explosion welding; Low detonation velocity explosive; Diluent; Detonation velocity;
D O I：
10.4028/www.scientific.net/AMR.393-395.1431
中图分类号：
Q81 [生物工程学（生物技术）]; Q93 [微生物学];
学科分类号：
071005 ; 0836 ; 090102 ; 100705 ;
摘要：
In order to solve a series of questions on low detonation velocity explosives used in explosion welding which was added into lots of salt, for example hand mixing is heterogeneous, low velocity detonation is unstable, moisture absorption and agglomeration of explosive is easy, ammonium nitrate (AN), wax, diluent, surfactant, gelling agent were mixed into slurry liquid when water temperature was controlled within 105-115 degrees C, and after this liquid was dried, sieved, and cooled at the pressure between -0.07and -0.09Mpa, it can made low detonation velocity explosives used in explosion welding. The microstructure and moisture absorption of the explosive was analyzed, the influence of the charge layout density and thickness on detonation velocity was researched. The results show that each component of the explosives is homogeneous, and is not easy to absorb moisture. When the density is 0.71-0.74g.cm(-3), the detonation velocity is 2300-2380m. s(-1),which can satisfy the requirement of explosion welding of mental plate.
引用
收藏
页码：1431 / +
页数：3
相关论文
共 46 条
[31]   Improved method for prediction of detonation velocity for C-H-N-O based pure, mixed and aluminized explosives [J].
Kumar, Satveer ;
Mehta, Devinder ;
Kumar, Manish ;
Kumar, Surinder ;
Soni, Pramod Kumar .
PROPELLANTS EXPLOSIVES PYROTECHNICS, 2024,
[32]   Study on key factors interfered detonation velocity of detonating cords [J].
Bai Yingwei ;
Jiang Zhuangde ;
Zhao Yulong ;
Wang Kexuan ;
Chu Enyi .
THEORY AND PRACTICE OF ENERGETIC MATERIALS, VOL VII, 2007, :468-470
[33]   Detonation product analysis and the paradoxical performance mechanism of TKX-50: High detonation velocity with low metal acceleration [J].
Tan, Kaiyuan ;
Zhao, Yaqi ;
Liu, Qin ;
Hao, Lixiao ;
Wen, Yushi ;
Ji, Chunliang ;
Yang, Sha ;
Wang, Haoxu ;
Jia, Luchuan ;
Liu, Jiahui ;
Duan, Zhuoping ;
Han, Yong ;
Huang, Fenglei .
DEFENCE TECHNOLOGY, 2025, 46 :255-266
[34]   Study on Detonation Sensitivity of Low Energy Detonating Fuses [J].
Mei Qun ;
Zhang Qian ;
Shen Zhaowu ;
Ma Honghao .
PROGRESS IN SAFETY SCIENCE AND TECHNOLOGY, VOL VII, PTS A AND B, 2008, 7 :1059-1061
[35]   Detonation Velocity of the VS-2 Pyrotechnic Composition and the Jones–Wilkins–Lee Equation-of-State Parameters of Its Explosion Products [J].
S. I. Gerasimov ;
P. G. Kuznetsov ;
V. A. Kuz’min ;
V. S. Rozhentsov ;
N. A. Trepalov ;
V. I. Erofeev .
Combustion, Explosion, and Shock Waves, 2022, 58 :217-225
[36]   Prediction of Detonation Velocity and N-O Composition of High Energy C-H-N-O Explosives by Means of Artificial Neural Networks [J].
Chandrasekaran, Nichith ;
Oommen, Charlie ;
Kumar, V. R. Sanal ;
Lukin, Alexander N. ;
Abrukov, Victor S. ;
Anufrieva, Darya A. .
PROPELLANTS EXPLOSIVES PYROTECHNICS, 2019, 44 (05) :579-587
[37]   Study of the Features of Obtaining Bimetallic Pipes and Rods by Explosion Welding with Subsequent Hot Deformation [J].
Malakhov A.Y. ;
Saikov I.V. ;
Denisov I.V. ;
Saikova G.R. ;
Gamin Y.V. ;
Romantsev B.A. ;
Gulyaev P.Y. .
Inorganic Materials: Applied Research, 2020, 11 (05) :1222-1228
[38]   Study on Explosion Welding of Titanium-Aluminum Laminated Plates with Different Explosive Charges [J].
Xie, Qinxian ;
Gao, Yonghong ;
Qiao, Yixuan ;
Zhang, Qinghui .
COATINGS, 2024, 14 (12)
[39]   Detonation Velocity of the VS-2 Pyrotechnic Composition and the Jones-Wilkins-Lee Equation-of-State Parameters of Its Explosion Products [J].
Gerasimov, S., I ;
Kuznetsov, P. G. ;
Kuz'min, V. A. ;
Rozhentsov, V. S. ;
Trepalov, N. A. ;
Erofeev, V., I .
COMBUSTION EXPLOSION AND SHOCK WAVES, 2022, 58 (02) :217-225
[40]   Study on mechanical properties of a bimetallic composite produced by explosion welding under incremental plastic deformation [J].
Konovalov, D. A. ;
Veretennikova, I. A. .
LETTERS ON MATERIALS-PIS MA O MATERIALAKH, 2018, 8 (02) :215-219
12345