Preparation of NiNbO/AISI 430 Ferritic Stainless Steel Monoliths for Catalytic Applications

被引：10
|
作者：
Santander, J. A. [1 ]
Lopez, E. [1 ]
Tonetto, G. M. [1 ]
Pedernera, M. N. [1 ]
机构：
[1] PLAPIQUI UNS CONICET, RA-9000 Bahia Blanca, Buenos Aires, Argentina
来源：
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH | 2014年 / 53卷 / 28期
关键词：
OXIDATIVE DEHYDROGENATION; PART I; ETHANE; COATINGS; NI;
D O I：
10.1021/ie501884g
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
AISI 430 ferritic stainless steel was used as a substrate to make catalytic monolithic structures. To increase the surface roughness of the substrate, the steel was oxidized at temperatures in the range of 900-940 degrees C and times in the range of 30-120 min. The oxide layer formed was characterized. Treatment at 940 degrees C for 60 min was found to be optimal for obtaining a Cr-rich rough oxide layer, with good adherence and homogeneity. Catalytic monoliths were prepared by dip-coating into four different slurries containing the Ni-Nb mixed oxide catalyst. The samples were characterized and tested in the oxidative dehydrogenation (ODH) of ethane to ethylene. The structured catalysts were active for the ODH of ethane, with very good selectivity to ethylene. The catalytic performance was remarkably constant for 170 h on stream at 400 degrees C.
引用
收藏
页码：11312 / 11319
页数：8
相关论文
共 50 条
  • [1] Strain aging of AISI 430 ferritic stainless steel
    Buono, VTL
    Gonzalez, BM
    Andrade, MS
    SCRIPTA MATERIALIA, 1997, 38 (02) : 185 - 190
  • [2] Continuous dynamic recrystallization of AISI 430 ferritic stainless steel
    Kim, SI
    Yoo, YC
    METALS AND MATERIALS INTERNATIONAL, 2002, 8 (01): : 7 - 13
  • [3] Continuous dynamic recrystallization of AISI 430 ferritic stainless steel
    Sung-Il Kim
    Yeon-Chul Yoo
    Metals and Materials International, 2002, 8 : 7 - 13
  • [4] A review on influence of nitriding on AISI430 ferritic stainless steel
    Manne, Vamshi
    Singh, S. K.
    Sateesh, N.
    Ram, Subbiah
    MATERIALS TODAY-PROCEEDINGS, 2020, 26 : 1010 - 1013
  • [5] Mn coating on AISI 430 ferritic stainless steel by pack cementation method for SOFC interconnect applications
    Ebrahimifar, Hadi
    Zandrahimi, Morteza
    SOLID STATE IONICS, 2011, 183 (01) : 71 - 79
  • [6] AISI 304 Austenitic stainless steels monoliths for catalytic applications
    Martinez, L. M.
    Sanz, O.
    Dominguez, M. I.
    Centeno, M. A.
    Odriozola, J. A.
    CHEMICAL ENGINEERING JOURNAL, 2009, 148 (01) : 191 - 200
  • [7] Preparation of MnOx/AISI 304 Austenitic Stainless Steel Monoliths for Catalytic Combustion of Ethyl Acetate
    Flavia G. Durán
    Bibiana P. Barbero
    Luis E. Cadús
    Catalysis Letters, 2011, 141 : 1786 - 1795
  • [8] Preparation of MnOx/AISI 304 Austenitic Stainless Steel Monoliths for Catalytic Combustion of Ethyl Acetate
    Duran, Flavia G.
    Barbero, Bibiana P.
    Cadus, Luis E.
    CATALYSIS LETTERS, 2011, 141 (12) : 1786 - 1795
  • [9] Performance of Resistance Spot Welding Joints for AISI 430 Ferritic Stainless Steel
    Feng Q.
    Li Y.
    Lou M.
    Lai X.
    Li, Yongbing (yongbinglee@sjtu.edu.cn), 1649, Shanghai Jiaotong University (52): : 1649 - 1654
  • [10] Increasing the strength of AISI 430 ferritic stainless steel by static strain ageing
    Kacar, R.
    Gunduz, S.
    KOVOVE MATERIALY-METALLIC MATERIALS, 2009, 47 (03): : 185 - 191
12345