Empirical Modelling for Prediction of Large Deformation of Clamped Circular Plates in Gas Detonation Forming Process

被引：13

作者：

Babaei, H. ^{[1
]}

Mostofi, T. Mirzababaie ^{[1
]}

Alitavoli, M. ^{[1
]}

Darvizeh, A. ^{[2
]}

机构：

[1] Univ Guilan, Fac Engn, Dept Mech Engn, POB 3756-41635, Rasht, Iran

[2] Islamic Azad Univ Bandar Anzali, Fac Engn, Dept Mech Engn, Anzali, Iran

来源：

EXPERIMENTAL TECHNIQUES | 2016年 / 40卷 / 06期

关键词：

Circular plate; Empirical modelling; Gas mixture detonation; Dimensionless numbers; RIGID-PLASTIC MEMBRANE; THIN PLATES; STEEL; IMPACT;

D O I：

10.1007/s40799-016-0063-3

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In this paper, empirical modelling of circular clamped plates subjected to impulsive loading is investigated. Plates are formed by detonation of a mixture of Oxygen and Acetylene in a combustion chamber with different volume ratios. The purpose of empirical modelling is to demonstrate how some parameters such as mechanical properties of plate and gas, impulse of applied load, plate geometry, velocity of sound in different gases and strain-rate sensitivity affect the large deformation of circular plates in high rate energy forming. The empirical modelling is investigated based on both dimensionless analysis and Zhao's dimensionless number. The midpoint deflection of plates are compared to the experimental values. It is noteworthy that the results of these empirical equations have good agreement with experimental ones. Moreover, it has been shown that the presented models have much less error in contrast to previous proposed methods.

引用

页码：1485 / 1494

页数：10

共 30 条

[1] INVESTIGATION INTO THE RESPONSE OF FULLY CLAMPED CIRCULAR STEEL, COPPER, AND ALUMINUM PLATES SUBJECTED TO SHOCK LOADING [J].