Experimental investigation of the unsteady rotor aerodynamics of a transonic turbine stage

被引:15
作者
Dénos, R [1 ]
Sieverding, CH [1 ]
Arts, T [1 ]
Brouckaert, JF [1 ]
Paniagua, G [1 ]
Michelassi, V [1 ]
机构
[1] Von Karman Inst Fluid Dynam, B-1640 Rhode St Genese, Belgium
关键词
unsteady flow; rotor aerodynamics; transonic turbine stage;
D O I
10.1243/0957650991537653
中图分类号
O414.1 [热力学];
学科分类号
摘要
This paper describes some results of a large experimental programme on unsteady flow through the rotor of a transonic turbine stage in the large Compression Tube Turbine Facility at the von Karman Institute for Fluid Dynamics. The tests were carried out as part of a Brite EURAM project. The test programme covered the investigation of the effects of a variation in the rotational speed of the rotor, the axial stator-rotor distance and the stator trailing-edge coolant flow ejection. The paper aims at presenting the measurements of the relative inlet total pressure and the rotor blade surface pressure at rotor mid-span.
引用
收藏
页码:327 / 338
页数:12
相关论文
共 31 条
[1]  
AINSWORTH R, 1995, VONKARMAN I LECT SER
[2]   MULTIGRID CALCULATION OF 3-DIMENSIONAL VISCOUS CASCADE FLOWS [J].
ARNONE, A ;
LIOU, MS ;
POVINELLI, LA .
JOURNAL OF PROPULSION AND POWER, 1993, 9 (04) :605-614
[3]  
ARTS T, 1994, P 30 AIAA ASME SAE A
[4]   UNSTEADY AERODYNAMIC AND HEAT-TRANSFER PROCESSES IN A TRANSONIC TURBINE STAGE [J].
ASHWORTH, DA ;
LAGRAFF, JE ;
SCHULTZ, DL ;
GRINDROD, KJ .
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 1985, 107 (04) :1022-1030
[5]  
BYRNE CM, 1996, 96GT514 ASME
[6]  
DENOS R, 1996, THESIS U POITIERS
[7]  
DIETZ AJ, 1992, 92GT156 ASME
[8]   SIMULATION OF THE EFFECTS OF SHOCK-WAVE PASSING ON A TURBINE ROTOR BLADE [J].
DOORLY, DJ ;
OLDFIELD, MLG .
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 1985, 107 (04) :998-1006
[9]  
DOORLY DJ, 1985, 85GT112 ASME
[10]   TURBINE ROTOR-STATOR INTERACTION [J].
DRING, RP ;
JOSLYN, HD ;
HARDIN, LW ;
WAGNER, JH .
JOURNAL OF ENGINEERING FOR POWER-TRANSACTIONS OF THE ASME, 1982, 104 (04) :729-742