Residual stress induced convex bending in laser peen formed aluminum alloy

被引：18
|
作者：
Zhou, W. F. [1 ,2 ]
Ren, X. D. [1 ]
Wang, C. C. [1 ]
Yang, X. Q. [1 ]
Larson, Enoch Asuako [1 ]
机构：
[1] Jiangsu Univ, Sch Mech Engn, Zhenjiang 212013, Peoples R China
[2] Swinburne Univ Technol, Fac Sci Engn & Technol, Hawthorn, Vic 3122, Australia
来源：
JOURNAL OF LASER APPLICATIONS | 2018年 / 30卷 / 01期
基金：
中国国家自然科学基金;
关键词：
laser shock forming; residual stress; aluminum alloy; plastic deformation;
D O I：
10.2351/1.5012962
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Laser peen forming is a purely mechanical forming method developed to accurately bend, shape, precision align, or repair components using nanosecond-pulsed laser induced shock waves. This paper aims to clarify the residual stress induced bending process in laser peen formed aluminum alloy plates. Finite element simulations were performed to investigate the bending angle and residual stress redistribution before and after bending. A reasonable agreement between simulation and experiment results was achieved. The results showed that larger bending angle was obtained by increasing the number of laser impacts and laser peened area. Besides, the bending angle in 3mm plates was larger than that in 2mm plates under the same processing condition. The laser peening induced bending angle is controlled by a residual stress gradient in the thickness direction. (C) 2017 Laser Institute of America.
引用
收藏
页数：8
相关论文
共 50 条
  • [41] Residual stress in quenched 7075 aluminum alloy thick plates
    林高用
    张辉
    朱伟
    彭大暑
    梁轩
    周鸿章
    Transactions of Nonferrous Metals Society of China, 2003, (03) : 641 - 644
  • [42] The effects of process variations on residual stress in laser peened 7049 T73 aluminum alloy
    Rankin, JE
    Hill, MR
    Hackel, LA
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 349 (1-2): : 279 - 291
  • [43] Numerical Simulation of Temperature Field and Residual Stress of T Welded Joint of Aluminum Alloy
    Yang, Shao-hong
    Wei, Zhao-yi
    Huang, Fang
    2ND INTERNATIONAL CONFERENCE ON MODELING, SIMULATION AND OPTIMIZATION TECHNOLOGIES AND APPLICATIONS (MSOTA 2018), 2018, : 26 - 31
  • [44] Evaluation model of residual stress field of pre-stretched aluminum alloy plate
    Wu Y.-X.
    Gong H.
    Liao K.
    Huanan Ligong Daxue Xuebao/Journal of South China University of Technology (Natural Science), 2011, 39 (01): : 90 - 94
  • [45] Simulation of residual stress in aluminum alloy welding seam based on computer numerical simulation
    Zhen, Wen
    Li, Huanhuan
    Wang, Qing
    OPTIK, 2022, 258
  • [46] Evaluation of residual stress relief of aluminum alloy 7050 by using crack compliance method
    Wang, QC
    Ke, YL
    Xing, HY
    Weng, ZY
    Yang, FE
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2003, 13 (05) : 1190 - 1193
  • [47] Effect of an absorbent overlay on the residual stress field induced by laser shock processing on aluminum samples
    Rubio-Gonzalez, C.
    Gomez-Rosas, G.
    Ocana, J. L.
    Molpeceres, C.
    Banderas, A.
    Porro, J.
    Morales, A.
    APPLIED SURFACE SCIENCE, 2006, 252 (18) : 6201 - 6205
  • [48] Numerical simulation and experimental investigation of the aluminum alloy quenching-induced residual stress by considering the flow stress characteristic
    Zhu C.
    Luo J.
    Li D.
    Zhong Y.
    Li Y.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2010, 46 (22): : 41 - 46
  • [49] Evaluation of residual stress relief of aluminum alloy 7050 by using crack compliance method
    王秋成
    柯映林
    邢鸿燕
    翁泽宇
    杨芳儿
    Transactions of Nonferrous Metals Society of China, 2003, (05) : 1190 - 1193
  • [50] Influence of Repair Welding on Mechanical Property and Residual Stress of Laser-MIG Hybrid Welded 6082 Aluminum Alloy Butt Joint
    Zhang, Zhiyi
    Kan, Ying
    Han, Xiaohui
    Ma, Yin
    Liu, Yang
    Jiang, Yunlu
    Chen, Jing
    Chen, Huaining
    SCIENCE OF ADVANCED MATERIALS, 2023, 15 (02) : 156 - 168
12345