Nonlinear FEA of Two-Way RC Slabs' Punching Behavior with Openings

被引:2
作者
Anil, Ozgur [1 ]
Ulusoy, Burcak [1 ]
机构
[1] Gazi Univ, Dept Civil Engn, TR-06570 Ankara, Turkey
关键词
Two-way RC slab; Punching shear; Opening; Finite element analysis; ANSYS; FINITE-ELEMENT-ANALYSIS; FLAT SLABS; SHEAR-STRENGTH; DESIGN METHOD; CONCRETE; PREDICTION; SIMULATION; PLATES;
D O I
10.1007/s40996-019-00301-y
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
In this study, effect of varying opening location and size on the punching behavior of two-way RC flat slabs was investigated through the finite element analyses. For this purpose, the two-way RC flat slabs with openings in the literature done by the authors were simulated using finite element modeling technique. The variables that were investigated in the study are the location and size of the opening. For the study, two-way square slabs having the dimensions of 2000 x 2000 x 120 mm with openings were analyzed. The nonlinear analyses were performed using the ANSYS FEA software with reference to the experimental data. The experimental results were compared with the finite element analyses results. According to the results of this study, it was shown that when properly modeled, finite element simulations may be used as efficient tools for estimating the nonlinear behavior of flat slabs with openings subjected to punching capacities. Simulations performed using verified finite element models estimated the punching shear force capacity of the flat slabs with variable openings with 7% average error. Moreover, the load-displacement relationships of the specimens are estimated in good agreement with their experimental counterparts.
引用
收藏
页码:1109 / 1124
页数:16
相关论文
共 40 条
[31]  
Muttoni A, 2008, ACI STRUCT J, V105, P440
[32]  
Oliveira D. C., 2014, Rev. IBRACON Estrut. Mater., V7, P414
[33]  
Ozbolt J., 2000, International Workshop on Punching Shear Capacity of RC Slabs-Proceedings, Stockholm, Trita-BKN, V57, P65
[34]   Shell finite element analysis of RC plates supported on columns for punching shear and flexure [J].
Polak, MA .
ENGINEERING COMPUTATIONS, 2005, 22 (3-4) :409-428
[35]   FRICTION COEFFICIENT OF STEEL ON CONCRETE OR GROUT [J].
RABBAT, BG ;
RUSSELL, HG .
JOURNAL OF STRUCTURAL ENGINEERING-ASCE, 1985, 111 (03) :505-515
[36]   Analysis of Punching Shear Capacity of RC Flat Slabs Produced with Partial Replacement of Cement by Pulverized Fly Ash (PFA) [J].
Samad, Shahab ;
Shah, Attaullah .
IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING, 2018, 42 (02) :181-190
[37]  
Shah S., 1995, FRACTURE MECH CONCRE
[38]   Prediction of punching behaviour of RC slabs using continuum non-linear FE analysis [J].
Shu, Jiangpeng ;
Plos, Mario ;
Zandi, Kamyab ;
Johansson, Morgan ;
Nilenius, Filip .
ENGINEERING STRUCTURES, 2016, 125 :15-25
[39]  
Willam K.J., 1975, Proceeding of the international association for bridge and structural engineering, V19, P174
[40]   Finite element investigation of the structural behaviour of deck slabs in composite bridges [J].
Zheng, Yu ;
Robinson, Des ;
Taylor, Su ;
Cleland, David .
ENGINEERING STRUCTURES, 2009, 31 (08) :1762-1776