Influence of particles in Cu-Al2O3 system on fracture mechanism

被引：2
作者：
Besterci, M
Ivan, J
Kovac, L
机构：
[1] Slovak Acad Sci, Inst Mat Res, Kosice 04353, Slovakia
[2] SAS, Inst Mat & Mech Machines, Bratislava 83008, Slovakia
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2001年 / 319卷
关键词：
fracture mechanism; in situ tensile test in SEM; Cu-Al2O3; dispersion strengthened system;
D O I：
10.1016/S0921-5093(00)02030-X
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The influence of Al2O3 particles on fracture of the Cu-Al2O3 system is analyzed by 'in situ tensile test in SEM'. It has been shown, that tensile strain in the extrusion direction produced first micro cavities on matrix-particle interfaces due to decohesion of particles from the matrix. The cavities grow and coalesce first in the direction of rows of particles with growing strain, and then in direction perpendicular to the rows, leading to final fracture. The strain at fracture is dependent on Al2O3 particle volume fraction. The fracture mechanism is not dependent on Al2O3 particle volume fraction in the tested range. Model explaining the fracture mechanism was introduced. (C) 2001 Elsevier Science B.V. All rights reserved.
引用
收藏
页码：667 / 670
页数：4
相关论文
共 50 条
  • [41] Fracture evaluation of Pt-Y2O3 composites in relation to qualitative factor
    Besterci, M
    Slesár, M
    Sülleiová, K
    Zbiral, J
    KOVOVE MATERIALY-METALLIC MATERIALS, 2001, 39 (06): : 422 - 426
  • [42] Microstructure, Fracture Mechanism, and Constitutive Analysis of Spray-Formed and Extruded Al-12Zn-2.4Mg-1.1Cu-0.3Zr Alloy
    Li Yang
    Wangzhang Lu
    Yaocheng Zhang
    Zheng Liu
    Di Wei
    Feng Xu
    Song Pang
    Ruifeng Li
    Journal of Materials Engineering and Performance, 2020, 29 : 8306 - 8318
  • [43] First-principles calculations on the adhesion strength, fracture mechanism, interfacial bonding of the semi-coherent Al(111)/Al3BC(0001) interfaces
    Peng, Mingjun
    Wang, Renfu
    Bao, Longke
    Duan, Yonghua
    APPLIED SURFACE SCIENCE, 2021, 569
  • [44] Electronic structure, bonding, and mechanical strength at the α-Al 2 O 3 (0001)/L12-Al3Zr 2-Al 3 Zr (111) interface by first-principles calculations
    Kang, Kaiwen
    Zhang, Zhibo
    Huang, Guangyao
    Guo, Defeng
    Chen, Lu
    Li, Yefei
    Zheng, Kaihong
    Urbassek, Herbert M.
    PHYSICA B-CONDENSED MATTER, 2024, 691
  • [45] Comparing mechanism response and thermal conductivity of Ti3C2 and Ti3C2O2
    Tseng, Po-Han
    Bui, Thi-Xuyen
    Lai, Tang-Yu
    Lu, Yu-Sheng
    Lai, Yu-Hsun
    Lin, Ming-Hong
    Fang, Te-Hua
    JAPANESE JOURNAL OF APPLIED PHYSICS, 2024, 63 (04)
  • [46] Effect of Fe-Bearing Phases on the Mechanical Properties and Fracture Mechanism of Al-2wt.%Cu-1.5wt.%Mn (Mg,Zn) Non-Heat Treatable Sheet Alloy
    Belov, Nikolay
    Akopyan, Torgom
    Tsydenov, Kirill
    Cherkasov, Stanislav
    Avxentieva, Natalia
    METALS, 2023, 13 (11)
  • [47] Experimental and Statistical Study of the Fracture Mechanism of Sn96.5Ag3Cu0.5 Solder Joints via Ball Shear Test
    Liang, Kun
    Wang, Yuexing
    He, Zhigang
    MATERIALS, 2022, 15 (07)
  • [48] Shear strength and fracture mechanism for full Cu-Sn IMCs solder joints with different Cu3Sn proportion and joints with conventional interfacial structure in electronic packaging
    Yao, Peng
    Li, Xiaoyan
    Han, Xu
    Xu, Liufeng
    SOLDERING & SURFACE MOUNT TECHNOLOGY, 2019, 31 (01) : 6 - 19
  • [49] Mechanical behaviors of ZL 109/Al2O3•SiO2 particle reinforced composites
    Li Yue-ying
    Cao Zhan-yi
    Liu Yong-bing
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2007, 17 : S290 - S294
  • [50] Mechanical behaviors of ZL109/Al2O3·SiO2 particle reinforced composites
    李月英
    曹占义
    刘勇兵
    Transactions of Nonferrous Metals Society of China, 2007, (S1) : 290 - 294
12345