Z-phase formation in welded joints of high chromium ferric steels after long-term creep

被引:36
作者
Sawada, K. [1 ]
Tabuchi, M. [1 ]
Hongo, H. [2 ]
Watanabe, T. [2 ]
Kimura, K. [2 ]
机构
[1] Natl Inst Mat Sci, Mat Reliabil Ctr, Tsukuba, Ibaraki 3050047, Japan
[2] Natl Inst Mat Sci, Mat Data Sheet Stn, Tsukuba, Ibaraki 3050047, Japan
关键词
9-12% Cr steel; welded joint; creep-strength degradation; fine-grained heat-affected zone; Z-phase formation;
D O I
10.1016/j.matchar.2007.09.009
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The precipitation behavior of Z phase in welded joints was investigated after long-term creep tests in ASME Gr.92 and Gr.122 type steels. Z phase was distinguished from MX carbonitrides by comparing elemental maps for Cr and V. The creep strength of welded joints was smaller than that of the base metal for times longer than 1000 h at 923 K for both steels. Z-phase particles were observed at prior austenite grain boundaries in the fine-grained heat-affected zones of both steels after long-teen creep testing. The size of the Z-phase particles was 70-400 nm, which is similar to those of the M23C6 and Laves phases. In the fine-grained heat-affected zone, the number density of Z phase in Gr.122 was five times higher than that in Gr.92. The formation of a large number of Z-phase particles causes the disappearance of MX carbonitrides in Gr.122, compared with Gr.92. (C) 2007 Elsevier Inc. All rights reserved.
引用
收藏
页码:1161 / 1167
页数:7
相关论文
共 18 条
[1]   Microstructural investigations on Type IV cracking in a high Cr steel [J].
Albert, SK ;
Matsui, M ;
Watanabe, T ;
Hongo, H ;
Kubo, K ;
Tabuchi, M .
ISIJ INTERNATIONAL, 2002, 42 (12) :1497-1504
[2]  
CERJAK H, 2000, P 5 INT C PARS TURB
[3]  
Danielsen H. K., 2006, Energy Materials, V1, P49, DOI 10.1179/174892306X99732
[4]  
HALD J, 2006, 8 LIEG C MAT ADV POW
[5]  
Hasegawa Y, 2006, TETSU TO HAGANE, V92, P618
[6]  
HEUSER H, 2001, P 3 C ADV MAT TECHN
[7]  
KIMURA K, 2005, P PVP2005 2005 ASME
[8]  
Kimura K., 2006, P PVP2006 ICPVT 11 2
[9]   Microstructural degradation of the HAZ in 11Cr-0.4Mo-2W-VNb-Cu steel (P122) during creep [J].
Komai, N ;
Masuyama, F .
ISIJ INTERNATIONAL, 2002, 42 (12) :1364-1370
[10]  
Kushima H, 1999, TETSU TO HAGANE, V85, P841