Spatiotemporal assessment of groundwater quality in the Central Ganga Plain, India, using multivariate statistical tools

In the present study, the water quality status of the Sadar block in Pratapgarh district of Uttar Pradesh, India, was calculated by Water Pollution Index (WPI) using 15 groundwater quality parameters (pH, turbidity, EC (electric conductivity), TDS (total dissolved solids), salinity, total hardness, Ca2+, K+, Mg2+, Na+, Cl-, F-, SO42-, HCO3-, and NO3-) at 40 different study locations. It is found that 10%, 25%, and 65%, of samples, fall under the good, moderately polluted, and highly polluted category, respectively. Irrigation suitability of groundwater has also been evaluated by using irrigation suitability parameters, i.e., Sodium Absorption Ratio (SAR), Residual Sodium Carbonate (RSC), Permeability Index (PI), Kelly Ratio (KR), Percentage Sodium (% Na), and Magnesium Hazards (MH). Based on the analysis, it was determined that most of the samples were suitable for irrigation in the area. Irrigation practices are found to be unsuitable for Kelly's ratio of 37.5%, MH 60%, and RSC 55% samples. WPI and Pearson's correlation matrix (PCA) have suggested a significant linear relationship among the water quality parameters based on the test results. The Gibbs plot indicates that the majority of samples fall under the "evaporation dominance" category while the rest fall under the "rock weathering dominance" suggesting that the complex geochemical mechanisms are active in the study area. This study would be very helpful to government authorities and it would aid them to suggest alternate drinking water resources in affected areas.