A four phase model for the macrosegregation and shrinkage cavity during solidification of steel ingot

被引:73
作者
Wu, M. [1 ,2 ]
Ludwig, A. [2 ]
Kharicha, A. [1 ,2 ]
机构
[1] Univ Leoben, Christian Doppler Lab Adv Proc Simulat Solidifica, A-8700 Leoben, Austria
[2] Univ Leoben, Dept Met, A-8700 Leoben, Austria
基金
奥地利科学基金会;
关键词
Solidification; Macrosegregation; Shrinkage; Cavity; Porosity; Ingot; DIFFUSION-GOVERNED SOLIDIFICATION; GLOBULAR EQUIAXED SOLIDIFICATION; TRANSPORT PHENOMENA; MACRO SEGREGATION; TERNARY ALLOYS; COLUMNAR; SIMULATION; PREDICTION; CASTINGS; POROSITY;
D O I
10.1016/j.apm.2016.08.023
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A four-phase mixed columnar-equiaxed solidification model is introduced to calculate the formation of macrosegregation and shrinkage cavity during solidification of steel ingot. The four phases are the liquid melt, the solidifying solid with columnar morphology, the solidifying solid with equiaxed morphology, and the gas phase (or covering liquid slag). Multiphase/multiphysics transport phenomena (mass, momentum, species and enthalpy) are solved with a volume-average approach. Solidification induced mass and species transfers among metal phases are considered according to the thermodynamics and diffusion governed crystal growth kinetics. The gas phase (or covering liquid slag) is only required to feed the shrinkage cavity and no mass/species exchange with other metal phases occurs. The following modeling results are obtained: the progress of columnar tip front and growth of columnar tree trunks, the nucleation and growth of equiaxed grains, the melt flow and equiaxed crystal sedimentation, the solute partitioning at the solid/liquid interface, the transport of the solute species and induced macrosegregation, the shrinkage cavity, the interaction or competition between growing columnar and equiaxed phases and the occurrence of columnar to equiaxed transition (CET). Those modeling capacities were verified by the calculation of a 10.5 tons steel ingot. The experimentally determined profile of the shrinkage cavity, Sulfur print and chemical analysis of macrosegregation of the ingot in a vertical section were also available. Satisfactory agreement was obtained between the simulation and experimental result. Finally, a new hypothesis for the initialization of A-segregates is proposed: the motion of equiaxed phase and its interaction with the melt flow in the vicinity of growing columnar tip front lead to formation of an A-shape segregation band starting from the ingot corner just above the columnar-to-equiaxed transition area. This A-segregation band might provide a favored location for the initialization of A segregates. Further dedicated experiment should be carried out to verify it. (C) 2016 Elsevier Inc. All rights reserved.
引用
收藏
页码:102 / 120
页数:19
相关论文
共 58 条
[1]  
[Anonymous], MAGMASOFT V4 5
[2]   Simulation of the three-dimensional morphology of solidification porosity in an aluminium-silicon alloy [J].
Atwood, RC ;
Lee, PD .
ACTA MATERIALIA, 2003, 51 (18) :5447-5466
[4]   Development of a freckle predictor via Rayleigh number method for single-crystal nickel-base superalloy castings [J].
Beckermann, C ;
Gu, JP ;
Boettinger, WJ .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2000, 31 (10) :2545-2557
[5]  
Blank J.B., 1965, STEEL TIMES 0723, P110
[6]  
Blank J.R., 1968, SOLIDIFICATION METAL, P370
[7]   Prediction of Shrinkage Pore Volume Fraction Using a Dimensionless Niyama Criterion [J].
Carlson, Kent D. ;
Beckermann, Christoph .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2009, 40A (01) :163-175
[8]   Analysis of a numerical benchmark for columnar solidification of binary alloys [J].
Combeau, H. ;
Bellet, M. ;
Fautrelle, Y. ;
Gobin, D. ;
Arquis, E. ;
Budenkova, O. ;
Dussoubs, B. ;
Du Terrail, Y. ;
Kumar, A. ;
Gandin, Ch-A ;
Goyeau, B. ;
Mosbah, S. ;
Quatravaux, T. ;
Rady, M. ;
Zaloznik, M. .
MCWASP XIII: INTERNATIONAL CONFERENCE ON MODELING OF CASTING, WELDING AND ADVANCED SOLIDIFICATION PROCESSES, 2012, 33
[9]   Prediction of Macrosegregation in Steel Ingots: Influence of the Motion and the Morphology of Equiaxed Grains [J].
Combeau, Herve ;
Zaloznik, Miha ;
Hans, Stephane ;
Richy, Pierre Emmanuel .
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2009, 40 (03) :289-304
[10]  
FLEMINGS MC, 1967, T METALL SOC AIME, V239, P1449