Temperature field in severe plastic deformation at small strain rates

被引：3

作者：

Murthy, T. G. ^{[1
]}

Huang, C. ^{[1
]}

Shankarz, M. R. ^{[2
]}

Chandrasekar, S. ^{[1
]}

Trumble, K. P. ^{[3
]}

Sullivan, J. P. ^{[4
]}

机构：

[1] Purdue Univ, Ctr Mat Proc & Tribol, Sch Ind Engn, W Lafayette, IN 47907 USA

[2] Univ Pittsburgh, Dept Ind Engn, Pittsburgh, PA 15261 USA

[3] Purdue Univ, Sch Mat Engn, W Lafayette, IN 47907 USA

[4] Purdue Univ, Sch Aeronaut & Astronaut, W Lafayette, IN 47907 USA

来源：

NANOMATERIALS BY SEVERE PLASTIC DEFORMATION IV, PTS 1 AND 2 | 2008年 / 584-586卷

关键词：

temperature; strain-rate; Particle Image Velocimetry (PIV); infrared thermography; Zener-Hollomon parameter;

D O I：

10.4028/www.scientific.net/MSF.584-586.231

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The temperature and strain rate fields in severe plastic deformation (SPD) arc measured using infra-red thermography and Particle Image Velocimetry (PIV), respectively. Plane strain machining is used as the method of SPD to impose controlled strains and strain rates. For metals such as titanium, the temperature rise is small at small strain rates and SPD occurs at near-ambient temperature. The possibility of exploring dynamic recovery/recrystallization phenomena using the Zener-Hollomon parameter in this SPD framework is briefly discussed.

引用

页码：231 / 236

页数：6

共 50 条

[41] On the structural and phase transformations in solids induced by severe plastic deformation [J].

E. I. Teitel’ ;

L. S. Metlov ;

D. V. Gunderov ;

A. V. Korznikov .

The Physics of Metals and Metallography, 2012, 113 :1162-1168

[42] Inversion of Nitrogen Redistribution in Austenitic Steel by Severe Plastic Deformation [J].

Shabashov, V. A. ;

Lyashkov, K. A. ;

Kataeva, N., V ;

Korshunov, L. G. ;

Sagaradze, V. V. ;

Zamatovskii, A. E. .

PHYSICS OF METALS AND METALLOGRAPHY, 2021, 122 (07) :657-664

[43] Compositional patterning in immiscible alloys subjected to severe plastic deformation [J].

Schwen, Daniel ;

Wang, Miao ;

Averback, Robert S. ;

Bellon, Pascal .

JOURNAL OF MATERIALS RESEARCH, 2013, 28 (19) :2687-2693

[44] Enhancing the stability of β phase in TiZr via severe plastic deformation [J].

Zhang, Zhibo ;

Li, Ming ;

Guo, Defeng ;

Shi, Yindong ;

Ma, Tengyun ;

Zhang, Guosheng ;

Zhang, Xiangyi .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 588 :416-419

[45] Effect of temperature and strain rate on deformation behavior in metallic glassy films [J].

Cao, Q. P. ;

Ma, Y. ;

Wang, C. ;

Wang, X. D. ;

Jiang, J. Z. .

THIN SOLID FILMS, 2014, 561 :60-69

[46] Effect of Temperature and Strain Rate on Deformation Behavior of Invar 36 Alloy [J].

Li Xifeng ;

Chen Nannan ;

Li Jiaojiao ;

He Xueting ;

Liu Hongbing ;

Zheng Xingwei ;

Chen Jun .

ACTA METALLURGICA SINICA, 2017, 53 (08) :968-974

[47] DEFORMATION CHARACTERISTIC OF METAL FOAM UNDER DIFFERENT STRAIN RATE AND TEMPERATURE [J].

Wang, P. F. ;

Xu, S. L. ;

Hu, S. S. .

ADVANCES IN HETEROGENEOUS MATERIAL MECHANICS 2011, 2011, :667-670

[48] Understanding Deformation Behavior in Uniaxial Tensile Tests of Steel Specimens at Varying Strain Rates [J].

Banerjee, Dilip K. ;

Iadicola, Mark A. ;

Creuziger, Adam .

JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, 2022, 126

[49] Understanding Deformation Behavior in Uniaxial Tensile Tests of Steel Specimens at Varying Strain Rates [J].

Banerjee D.K. ;

Iadicola M.A. ;

Creuziger A. .

Journal of Research of the National Institute of Standards and Technology, 2021, 126

[50] High-Temperature Plastic Deformation of MgO Products [J].

Datsko, I. A. .

REFRACTORIES AND INDUSTRIAL CERAMICS, 2023, 64 (02) :184-187

← 1 2 3 4 5 →