Fabrication of high-strength duplex nanoporous Cu by dealloying a dual-phase Mg-Cu precursor alloy

被引：7

作者：

Lee, Si-Young ^{[1
]}

Baek, Soo-Min ^{[1
]}

Gwak, Eun-Ji ^{[1
]}

Kang, Na-Ri ^{[1
]}

Kim, Ju-Young ^{[1
]}

Kim, Su-Hyeon ^{[2
]}

Lee, Jung Gu ^{[3
]}

Park, Sung Soo ^{[1
]}

机构：

[1] Ulsan Natl Inst Sci & Technol, Sch Mat Sci & Engn, Ulsan 44919, South Korea

[2] Korea Inst Mat Sci, Chang Won 51508, South Korea

[3] Univ Ulsan, Sch Mat Sci & Engn, Ulsan 44610, South Korea

来源：

JOURNAL OF MAGNESIUM AND ALLOYS | 2020年 / 8卷 / 03期

基金：

新加坡国家研究基金会;

关键词：

Mg-Cu alloy; Nanoporous Cu; Dealloying; Duplex structure; Strength; YIELD STRENGTH; GOLD; COPPER; NI; EVOLUTION; METALS;

D O I：

10.1016/j.jma.2020.02.015

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Duplex nanoporous Cu was successfully fabricated by dealloying a dual-phase Mg-Cu precursor alloy consisting of intermetallic Mg2Cu and MgCu2. The duplex nanoporous Cu with embedded nanoporous struts exhibited highly enhanced strength compared to the typical monolithic nanoporous Cu under both compressive and flexural test conditions at room temperature; the duplex np-Cu sample exhibited a 12 times higher compressive strength and a 40 times greater flexural strength than the monolithic np-Cu sample. Factors responsible for the strength enhancement in the duplex nanoporous Cu are discussed. (c) 2020 Published by Elsevier B.V. on behalf of Chongqing University.

引用

页码：910 / 916

页数：7

共 38 条

[21] A further step towards an understanding of size-dependent crystal plasticity: In situ tension experiments of miniaturized single-crystal copper samples
Kiener, D.
Grosinger, W.
Dehm, G.
Pippan, R.
[J]. ACTA MATERIALIA, 2008, 56 (03) : 580 - 592
[22] Indentation size effect in nanoporous gold
Kim, Young-Cheon
Gwak, Eun-Ji
Ahn, Seung-min
Jang, Jae-il
Han, Heung Nam
Kim, Ju-Young
[J]. ACTA MATERIALIA, 2017, 138 : 52 - 60
[23] Surface-stress induced macroscopic bending of nanoporous gold cantilevers
Kramer, D
Viswanath, RN
Weissmuller, J
[J]. NANO LETTERS, 2004, 4 (05) : 793 - 796
[24] Electrochemical Deposition: An Advanced Approach for Templated Synthesis of Nanoporous Metal Architectures
Li, Cuiling
Iqbal, Muhammad
Lin, Jianjian
Luo, Xiliang
Jiang, Bo
Malgras, Victor
Wu, Kevin C. -W.
Kim, Jeonghun
Yamauchi, Yusuke
[J]. ACCOUNTS OF CHEMICAL RESEARCH, 2018, 51 (08) : 1764 - 1773
[25] Synthesis of porous copper from nanocrystalline two-phase Cu-Zr film by dealloying
Lu, Hai-Bo
Li, Ying
Wang, Fu-Hui
[J]. SCRIPTA MATERIALIA, 2007, 56 (02) : 165 - 168
[26] Nanoporous Gold-Testing Macro-scale Samples to Probe Small-scale Mechanical Behavior
Mameka, Nadiia
Wang, Ke
Markmann, Juergen
Lilleodden, Erica T.
Weissmueller, Joerg
[J]. MATERIALS RESEARCH LETTERS, 2016, 4 (01): : 27 - 36
[27] Porous Titanium Scaffolds with Aligned Lamellar Pore Channels by Directional Freeze-Casting from Aqueous TiH2 Slurries
Mao, Mengchen
Tang, Yufei
Zhao, Kang
Duan, Zihao
Wu, Cong
[J]. METALS AND MATERIALS INTERNATIONAL, 2019, 25 (02) : 508 - 515
[28] AN IMPROVED TECHNIQUE FOR DETERMINING HARDNESS AND ELASTIC-MODULUS USING LOAD AND DISPLACEMENT SENSING INDENTATION EXPERIMENTS
OLIVER, WC
PHARR, GM
[J]. JOURNAL OF MATERIALS RESEARCH, 1992, 7 (06) : 1564 - 1583
[29] Volume change during the formation of nanoporous gold by dealloying
Parida, S.
Kramer, D.
Volkert, C. A.
Roesner, H.
Erlebacher, J.
Weissmueller, J.
[J]. PHYSICAL REVIEW LETTERS, 2006, 97 (03)
[30] Ultrafine nanoporous gold by low-temperature dealloying and kinetics of nanopore formation
Qian, L. H.
Chen, M. W.
[J]. APPLIED PHYSICS LETTERS, 2007, 91 (08)

← 1 2 3 4 →