Fabrication of high-strength duplex nanoporous Cu by dealloying a dual-phase Mg-Cu precursor alloy

被引:7
作者
Lee, Si-Young [1 ]
Baek, Soo-Min [1 ]
Gwak, Eun-Ji [1 ]
Kang, Na-Ri [1 ]
Kim, Ju-Young [1 ]
Kim, Su-Hyeon [2 ]
Lee, Jung Gu [3 ]
Park, Sung Soo [1 ]
机构
[1] Ulsan Natl Inst Sci & Technol, Sch Mat Sci & Engn, Ulsan 44919, South Korea
[2] Korea Inst Mat Sci, Chang Won 51508, South Korea
[3] Univ Ulsan, Sch Mat Sci & Engn, Ulsan 44610, South Korea
基金
新加坡国家研究基金会;
关键词
Mg-Cu alloy; Nanoporous Cu; Dealloying; Duplex structure; Strength; YIELD STRENGTH; GOLD; COPPER; NI; EVOLUTION; METALS;
D O I
10.1016/j.jma.2020.02.015
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Duplex nanoporous Cu was successfully fabricated by dealloying a dual-phase Mg-Cu precursor alloy consisting of intermetallic Mg2Cu and MgCu2. The duplex nanoporous Cu with embedded nanoporous struts exhibited highly enhanced strength compared to the typical monolithic nanoporous Cu under both compressive and flexural test conditions at room temperature; the duplex np-Cu sample exhibited a 12 times higher compressive strength and a 40 times greater flexural strength than the monolithic np-Cu sample. Factors responsible for the strength enhancement in the duplex nanoporous Cu are discussed. (c) 2020 Published by Elsevier B.V. on behalf of Chongqing University.
引用
收藏
页码:910 / 916
页数:7
相关论文
共 38 条
  • [11] Modification of eutectic silicon in Al-Si alloys
    Hegde, Sathyapal
    Prabhu, K. Narayan
    [J]. JOURNAL OF MATERIALS SCIENCE, 2008, 43 (09) : 3009 - 3027
  • [12] Nanoporous Copper Silver Alloys by Additive-Controlled Electrodeposition for the Selective Electroreduction of CO2 to Ethylene and Ethanol
    Hoang, Thao T. H.
    Verma, Sumit
    Ma, Sichao
    Fister, Tim T.
    Timoshenko, Janis
    Frenkel, Anatoly I.
    Kenis, Paul J. A.
    Gewirth, Andrew A.
    [J]. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 2018, 140 (17) : 5791 - 5797
  • [13] Scaling equation for yield strength of nanoporous open-cell foams
    Hodge, A. M.
    Biener, J.
    Hayes, J. R.
    Bythrow, P. M.
    Volkert, C. A.
    Hamza, A. V.
    [J]. ACTA MATERIALIA, 2007, 55 (04) : 1343 - 1349
  • [14] Nanoporous Waveguide Sensor with Optimized Nanoarchitectures for Highly Sensitive Label-Free Biosensing
    Hotta, Kazuhiro
    Yamaguchi, Akira
    Teramae, Norio
    [J]. ACS NANO, 2012, 6 (02) : 1541 - 1547
  • [15] Scaling laws of nanoporous metals under uniaxial compression
    Huber, N.
    Viswanath, R. N.
    Mameka, N.
    Markmann, J.
    Weissmueller, J.
    [J]. ACTA MATERIALIA, 2014, 67 : 252 - 265
  • [16] Tensile deformation of electroplated copper nanopillars
    Jennings, Andrew T.
    Greer, Julia R.
    [J]. PHILOSOPHICAL MAGAZINE, 2011, 91 (7-9) : 1108 - 1120
  • [17] Microstructure versus Size: Mechanical Properties of Electroplated Single Crystalline Cu Nanopillars
    Jennings, Andrew T.
    Burek, Michael J.
    Greer, Julia R.
    [J]. PHYSICAL REVIEW LETTERS, 2010, 104 (13)
  • [18] Deforming nanoporous metal: Role of lattice coherency
    Jin, Hai-Jun
    Kurmanaeva, Lilia
    Schmauch, Joerg
    Roesner, Harald
    Ivanisenko, Yulia
    Weissmueller, Joerg
    [J]. ACTA MATERIALIA, 2009, 57 (09) : 2665 - 2672
  • [19] Flaw-free nanoporous Ni for tensile properties
    Kashani, Hamzeh
    Chen, Mingwei
    [J]. ACTA MATERIALIA, 2019, 166 : 402 - 412
  • [20] Extraordinary tensile strength and ductility of scalable nanoporous graphene
    Kashani, Hamzeh
    Ito, Yoshikazu
    Han, Jiuhui
    Liu, Pan
    Chen, Mingwei
    [J]. SCIENCE ADVANCES, 2019, 5 (02)