Minimum fluidization velocities for supercritical water fluidized bed within the range of 633-693 K and 23-27 MPa

被引:71
作者
Lu, Youjun [1 ]
Zhao, Liang [1 ]
Han, Qiang [1 ]
Wei, Liping [1 ]
Zhang, Ximin [1 ]
Guo, Liejin [1 ]
Wei, Jinjia [1 ]
机构
[1] Xi An Jiao Tong Univ, State Key Lab Multiphase Flow Power Engn SKLMF, Xian 710049, Shaanxi, Peoples R China
基金
中国国家自然科学基金;
关键词
Supercritical water; Fluidized bed; Frictional pressure drop; Minimum fluidization velocity; BIOMASS GASIFICATION; HYDROGEN-PRODUCTION; GAS; SOLIDS; EXPANSION; FLOW;
D O I
10.1016/j.ijmultiphaseflow.2012.10.005
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
Supercritical water fluidized bed is a new reactor concept for biomass gasification. In this paper, an experimental study on the hydrodynamics of a supercritical water fluidized bed was conducted. The frictional pressure drops of a fixed bed and a fluidized bed were measured for a temperature ranging from 633 to 693 K and pressure ranging from 23 to 27 MPa. The results show that the Ergun formula for calculating the frictional pressure drop of a fixed bed can still be applied in supercritical water conditions. The average deviation between Ergun formula and experiment results is 13.3%. A predicting correlation for the minimum fluidization velocity in a supercritical water fluidized bed was obtained based on the experimental results of a fixed bed and the fluidized bed pressure drop. The average error between the correlation and experiment results was about 3.1%. The results in this paper are useful for the design of SCW fluidized bed. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码:78 / 82
页数:5
相关论文
共 23 条
[1]  
Babu S.P., 1978, AIChE Symp. Ser, V74, P176
[2]   Minimum fluidization velocities for gas-solid 2D beds [J].
Caicedo, GR ;
Ruiz, MG ;
Marqués, JJP ;
Soler, JG .
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION, 2002, 41 (09) :761-764
[3]   CHARACTERISTICS OF FLUIDIZATION AT HIGH-PRESSURE [J].
CHITESTER, DC ;
KORNOSKY, RM ;
FAN, LS ;
DANKO, JP .
CHEMICAL ENGINEERING SCIENCE, 1984, 39 (02) :253-261
[4]  
ERGUN S, 1952, CHEM ENG PROG, V48, P89
[5]   Numerical simulation and experimental validation of solids flows in a bubbling fluidized bed [J].
Gamwo, IK ;
Soong, Y ;
Lyczkowski, RW .
POWDER TECHNOLOGY, 1999, 103 (02) :117-129
[6]   Hydrogen production from glucose used as a model compound of biomass gasified in supercritical water [J].
Hao, XH ;
Guo, LJ ;
Mao, X ;
Zhang, XM ;
Chen, XJ .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2003, 28 (01) :55-64
[7]  
Hetsroni G., 1982, HDB MULTIPHASE SYSTE, V8-5, P8
[8]   CFD studies of solids hold-up distribution and circulation patterns in gas-solid fluidized beds [J].
Hosseini, Seyyed Hossein ;
Ahmadi, Goodarz ;
Rahimi, Rahbar ;
Zivdar, Mortaza ;
Esfahany, Mohsen Nasr .
POWDER TECHNOLOGY, 2010, 200 (03) :202-215
[9]   High temperature and high pressure three-phase fluidization - Bed expansion phenomena [J].
Jiang, PJ ;
Luo, XK ;
Lin, TJ ;
Fan, LS .
POWDER TECHNOLOGY, 1997, 90 (02) :103-113
[10]   Aggregative and particulate fluidization - The two extremes of a continuous spectrum [J].
Liu, DJ ;
Kwauk, M ;
Li, HZ .
CHEMICAL ENGINEERING SCIENCE, 1996, 51 (17) :4045-4063