Determination of strontium content in strontium carbonate used for fireworks and firecrackers based on Energy Dispersive X-ray Fluorescence Spectrometry (EDXRF)

Methods used for the determination of strontium content in strontium carbonate are mostly based on traditional chemical method, which is lengthy and cumbersome. If inductively coupled plasma emission spectrometry or atomic absorption spectrometry are used to determine the strontium with high content, the sample solution must be highly diluted, and it must produce errors in measurement and call into question the reliability of the data. The method mentioned in this paper is about the determination of strontium content in strontium carbonate used for fireworks and firecrackers based on energy dispersive X-ray fluorescence spectrometry by controlling matrix effects between elements. Using sample solution of strontium carbonate in specific concentrates, the strontium content can be determined by the specific calibration curve established with an intensity calibration. This method can provide high accuracy and good precision in a short time with a simple process by efficiently controlling the matrix effects. It can fully meet the requirements for the determination of strontium in strontium carbonate used for different kinds of fireworks and firecrackers around the world, and it has good generalization and practicability. The average recovery of the method can be 98.37%similar to 99.15%, allowing for a difference of 0.5%.