Experimental investigation of effect of corrosion on injected fuel quantity and spray geometry in the diesel injection nozzles

被引：8

作者：

Karamangil, M. I. ^{[1
]}

Taflan, R. A. ^{[2
]}

机构：

[1] Uludag Univ, Fac Engn & Architecture, Dept Automot Engn, TR-16059 Bursa, Turkey

[2] Robert Bosch GmbH, Diesel Syst, Prod Dev Dept, TR-16159 Bursa, Turkey

来源：

FUEL | 2013年 / 112卷

关键词：

Corrosion; Diesel injector; Nozzle; Spray characteristic; VORTEX FLOW; CAVITATION; ENGINE; OILS;

D O I：

10.1016/j.fuel.2011.09.005

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

In this study, effect of corrosion on injected fuel quantity and spray geometry has been investigated experimentally in a piezo-driven common rail diesel injector. We performed the following examination steps on the nozzle parts for the cases prior to corrosion, after corrosion and after cleaning the corrosion material: (i) all important regions of the nozzle parts were photographed, (ii) microscopic pictures of the nozzle tip and interior of holes from outside have been taken with Scanning Electron Microscope, (iii) injection jets were photographed, (iv) injection quantities for different injection pressures and duration were determined and lastly, (v) hydraulic measurement of the nozzle was performed. Hydraulic measurement of the nozzle (in cm(3)/30 s@ 100 bar) showed that injection quantity decreased 26.26% after corrosion because of the corrosion deposits blocking nozzle hole and increased 5.68% after cleaning of deposits due to the enlargement of the holes. (C) 2011 Elsevier Ltd. All rights reserved.

引用

页码：531 / 536

页数：6

共 50 条

[41] Experimental and Numerical Investigation on Cavitating Flows in Diesel Injection Systems
A. Ficarella
D. Laforgia
Meccanica, 1998, 33 : 407 - 425
[42] Experimental investigation of spray formation in a hybrid atomizer using diesel, ethanol and ethanol blended diesel
Garai, Amlan
Mondal, Sudeepta
Pal, Subhadip
Chatterjee, Souvick
Sen, Swarnendu
Mukhopadhyay, Achintya
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2019, 100 : 158 - 170
[43] Effect of altitude on the split injection combustion process of diesel impinging spray
Yang, Kang
Shen, Yuhang
Jin, Yu
He, Zhixia
Chen, Yanpeng
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2024, 157
[44] Experimental investigation of tribo-corrosion and engine characteristics of Aegle Marmelos Correa biodiesel and its diesel blends on direct injection diesel engine
Thangarasu, Vinoth
Balaji, B.
Ramanathan, Anand
ENERGY, 2019, 171 : 879 - 892
[45] EXPERIMENTAL AND NUMERICAL INVESTIGATION OF DUCTED SPRAY WITH DUAL INJECTION STRATEGIES
Wang, Zhaojian
Liang, Tong
Zhang, Yuxin
Wang, Ziman
ATOMIZATION AND SPRAYS, 2023, 33 (05) : 21 - 46
[46] Computational study on the influence of nozzle eccentricity in spray formation by means of Eulerian Σ - Y coupled simulations in diesel injection nozzles
Salvador, F. J.
Pastor, J. M.
De la Morena, J.
Martinez-Miracle, E. C.
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 2020, 129
[47] An experimental investigation into the effect of hydrodynamic cavitation on diesel
Lockett, Russel D.
Jeshani, Mahesh
INTERNATIONAL JOURNAL OF ENGINE RESEARCH, 2013, 14 (06) : 606 - 621
[48] Optical spray investigation and numerical spray model calibration for the RCCI combustion mode with ethanol/CNG and diesel fuel
Yadav, Jaykumar
Guenther, Marco
Pischinger, Stefan
ENERGY CONVERSION AND MANAGEMENT, 2024, 302
[49] Experimental and Numerical Analysis of the Assisted Abrasive Flow of Magnetic Particles on the Polishing of Fuel Injection Nozzles
Liu, Guosong
Li, Junye
Zhu, Shangfu
Zhu, Xu
Qu, Jiyong
Zhang, Xinming
MAGNETOCHEMISTRY, 2022, 8 (03)
[50] Numerical investigation of the effect of multi-walled carbon nanotube additive on nozzle flow and spray behaviors of diesel fuel
Sa, Bowen
Markov, Vladimir
Liu, Ying
Kamaltdinov, Vyacheslav
Qiao, Wenpei
FUEL, 2021, 290

← 1 2 3 4 5 →