The Modeling Of Rubber Sealing Ring Of Fluid Dynamic Pressure And Finite Element Analysis about Stress Based On SolidWorks And ANSYS

被引：2
|
作者：
Zhu, Juan [1 ]
Zou, Longqing [1 ]
Han, Shijie [1 ]
机构：
[1] Northeast Petr Univ, Mech Sci & Engn Coll, Daqing City 163318, Heilongjiang Pr, Peoples R China
来源：
ADVANCES IN DESIGN TECHNOLOGY, VOLS 1 AND 2 | 2012年 / 215-216卷
关键词：
SolidWorks; ANSYS; sealing ring; rubber; finite element;
D O I：
10.4028/www.scientific.net/AMM.215-216.1246
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Hydrodynamic seal ring is based on the hydrodynamic effect of rotary shaft seal, Kalsi sealing ring is the typical type of products, and the design of sealing lip adopts unique waveform structure. Based on geometry analysis of the sealing ring, the 3D model of the ring was established by using SolidWorks software, and then the model was introduced into finite element software ANSYS, which was used to analyse stress for the Kalsi of rubber sealing ring. Through the analysis of the stress of rubber ring, the position of the maximum stress value of the rubber seal in hydrodynamic pressure was wave crest (valley) in the edge of the wave side. When the pressure of seal was 10MPa, the maximum value of stress of rubber sealing was up to 6.54MPa.
引用
收藏
页码：1246 / 1249
页数：4
相关论文
共 12 条
  • [1] Virtual Modeling and Finite Element Analysis of Flexspline Based on Solidworks
    Zhang Rong
    Yang Jiajun
    ADVANCES IN POWER TRANSMISSION SCIENCE AND TECHNOLOGY, 2011, 86 : 218 - +
  • [2] Finite Element Analysis of Ring-plate Indexing Cam Mechanism Contact Stress based on MATLAB and ANSYS
    Li Yanqi
    Liu Mingtao
    Tian Guangcai
    MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-8, 2012, 383-390 : 2862 - +
  • [3] The finite element analysis based on ANSYS pressure-sensitive conductive rubber three-dimensional tactile sensor
    Huang, Ying
    Huang, Panfeng
    Wang, Min
    Wang, Lei
    Ge, Yunjian
    ADVANCED INTELLIGENT COMPUTING THEORIES AND APPLICATIONS: WITH ASPECTS OF CONTEMPORARY INTELLIGENT COMPUTING TECHNIQUES, 2007, 2 : 1195 - +
  • [4] Finite Element Modeling and Analysis on Interfacial Contact Temperature of Gears Based on ANSYS
    Jie, Li
    Lei, Zhang
    Qi, Zhao
    2009 IEEE 10TH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED INDUSTRIAL DESIGN & CONCEPTUAL DESIGN, VOLS 1-3: E-BUSINESS, CREATIVE DESIGN, MANUFACTURING - CAID&CD'2009, 2009, : 668 - 673
  • [5] Finite Element Analysis of a Simply Supported MR Fluid Sandwich Beam Based on ANSYS
    Zhang, Zheng-xin
    Huang, Fang-lin
    Wu, Yan-bin
    ADVANCES IN STRUCTURAL ENGINEERING, PTS 1-3, 2011, 94-96 : 902 - 908
  • [6] Finite Element Analysis of Pressure Device in Die-cutting Based on the ANSYS Workbench
    Shen, Shaohua
    Shi, Xiangdong
    ADVANCED MANUFACTURING TECHNOLOGY, PTS 1, 2, 2011, 156-157 : 1195 - 1198
  • [7] Finite element stress analysis with consideration of equivalent stress in ANSYS - Case study of Namchien dam under static and dynamic conditions
    Hoang-hung Vu
    Li, Tong-chun
    Quang-hung Nguyen
    APPLIED MECHANICS AND CIVIL ENGINEERING II, 2012, 188 : 270 - +
  • [8] Analysis of Biomass Briquette Machine Ring Mold Length-diameter Ratio of Finite Element based on ANSYS
    Liu, Bing-cheng
    Liang, Xiao-ming
    Guo, Hong-yu
    PROGRESS IN POLYMER PROCESSING, 2012, 501 : 463 - +
  • [9] Modeling and stress analysis of aluminium alloy based composite pressure vessel through ANSYS software
    Mohanavel, V
    Prasath, S.
    Arunkumar, M.
    Pradeep, G. M.
    Babu, S. Surendra
    MATERIALS TODAY-PROCEEDINGS, 2021, 37 : 1911 - 1916
  • [10] Finite element modal analysis of frame of vertical type high-pressure grouting machine based on ANSYS
    Huang, Zhicheng
    Li, Zelun
    FRONTIERS OF MECHANICAL ENGINEERING AND MATERIALS ENGINEERING, PTS 1 AND 2, 2012, 184-185 : 235 - +
12