ISO 10360 verification tests applied to CMMs equipped with a laser line scanner

被引:5
作者
Boeckmans, B. [1 ]
Probst, G. [2 ]
Zhang, M. [1 ,3 ]
Dewulf, W. [2 ]
Kruth, J. -P. [1 ]
机构
[1] Katholieke Univ Leuven, Dept Mech Engn, Celestijnenlaan 300b, B-3001 Leuven, Belgium
[2] Katholieke Univ Leuven, Dept Mech Engn, A Vesaliusstr 13, B-3001 Leuven, Belgium
[3] BJUT, Beijing Engn Res Ctr Prec Meas Tech & Instruments, Beijing 100124, Peoples R China
来源
DIMENSIONAL OPTICAL METROLOGY AND INSPECTION FOR PRACTICAL APPLICATIONS V | 2016年 / 9868卷
关键词
Dimensional Metrology; CMM; Laser Line Scanner; ISO; 10360;
D O I
10.1117/12.2227061
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
Within the field of quality control and dimensional metrology, the evolutions in the domain of production processes are triggering more use of non-contact measurement equipment to assure faster feature assessment where possible. This led to the development of for instance laser line scanners. The standardization of these new tools follows these novel evolutions. As the coordinate measuring systems (CMSs) which include coordinate measuring machines (CMMs) with its diversity in measurement probes widens its spectrum, the ISO 10360 standard series is rearranged and split up in more parts, covering specific probe groups. The previously mentioned laser line scanners, that can be equipped on a CMM, are integrated within ISO 10360-8 which applies for CMMs equipped with optical distance sensors. This paper is an example of how to interpret and apply this standard to a specific optical distance sensor. This has to be done by taking into account the sensor's characteristics. The intrinsic properties in the technique require an in-depth look at the recommended guidelines within the standard. Furthermore, the guidelines are adapted to use the same capabilities of the laser line scanner, which are used for measuring, without eliminating the uncertainties present in practical use of the sensor. The verification tests and their implementation are discussed, adapted to the sensors needs and performed on a state-of-the-art CMM. The verification parameter results are determined, presented and critically evaluated.
引用
收藏
页数:10
相关论文
共 27 条
[1]  
[Anonymous], 1036072011 ISO
[2]  
[Anonymous], 1036052010 ISO
[3]  
[Anonymous], 1036010 ISO
[4]  
[Anonymous], 1036011 ISOWD
[5]  
[Anonymous], 1036022009 ISO
[6]  
[Anonymous], 1036092013 ISO
[7]   Accuracy improvement of laser line scanning for feature measurements on CMM [J].
Besic, Igor ;
Van Gestel, Nick ;
Kruth, Jean-Pierre ;
Bleys, Philip ;
Hodolic, Janko .
OPTICS AND LASERS IN ENGINEERING, 2011, 49 (11) :1274-1280
[8]   Computed tomography characterisation of additive manufacturing materials [J].
Bibb, Richard ;
Thompson, Darren ;
Winder, John .
MEDICAL ENGINEERING & PHYSICS, 2011, 33 (05) :590-596
[9]  
Boeckmans B., 2013, P LAMDAMAP 10, P279
[10]  
Boeckmans B., 2015, INT J AUTOMATION TEC, V9, P466