Effect of impurity Fe on corrosion behavior of AM50 and AM60 magnesium alloys

被引：68
|
作者：
Matsubara, Hiroshi [1 ]
Lchige, Yasuhiro [1 ]
Fujita, Kazuaki [1 ]
Nishiyama, Hiroshi [1 ]
Hodouchi, Kazunori [1 ]
机构：
[1] Nagaoka Univ Technol, Dept Mat Sci & Technol, Nagaoka, Niigata 9402188, Japan
来源：
CORROSION SCIENCE | 2013年 / 66卷
关键词：
Magnesium; Alloy; Pitting corrosion; Inclusion; EPMA; AC-IMPEDANCE SPECTROSCOPY; AZ91; RESISTANCE; MECHANISMS; ADDITIONS; ND;
D O I：
10.1016/j.corsci.2012.09.021
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In the present study, the corrosion behavior of AM magnesium alloys (AM50 and AM60) in 5% NaCl solution was examined. The corrosion rate was found to depend on the impurity concentration in the alloy, and increased with Fe/Mn ratio. Inclusions were present within the alloys, with compositions of 40-80% Al, 20-60% Mn, and 0-10% Fe. It was determined that these inclusions acted as initiation points for corrosion. In addition, corrosion preferentially occurred at inclusions with a high Fe content, and the Fe content of inclusions was found to be proportional to that in the alloy itself. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码：203 / 210
页数：8
相关论文
共 50 条
  • [31] THE EFFECT OF THERMOMECHANICAL PROCESSING ON THE TENSILE AND FATIGUE BEHAVIOR OF THIXOMOLDED® AM60
    Chen, Z.
    Kuhr, B.
    Ritter, A.
    Huang, J.
    Decker, R.
    LeBeau, S.
    Boehlert, C. J.
    MAGNESIUM TECHNOLOGY 2010, 2010, : 495 - +
  • [32] Corrosion and Mechanical Behavior of the As-Cast and Solid-Solution-Treated AM50 Magnesium Alloy in Different Media
    Yang, Miao
    Liu, Xiaobo
    Xing, Liyun
    Chen, Zhaoyu
    MATERIALS, 2023, 16 (06)
  • [33] Cathodic Corrosion of Magnesium Alloy AM50 in Deicing Salt Solutions During "Cathodic Protection"
    Grabowski, M.
    Virtanen, S.
    CORROSION, 2017, 73 (05) : 563 - 582
  • [34] Characterisation of tribological and corrosion behaviour of plasma electrolytic oxidation coated AM50 magnesium alloy
    Srinivasan, P. Bala
    Blawert, C.
    Stoermer, M.
    Dietzel, W.
    SURFACE ENGINEERING, 2010, 26 (05) : 340 - 346
  • [35] Corrosion behavior of a self-sealing pore micro-arc oxidation film on AM60 magnesium alloy
    Dong, Kaihui
    Song, Yingwei
    Shan, Dayong
    Han, En-Hou
    CORROSION SCIENCE, 2015, 100 : 275 - 283
  • [36] Quantification of Corrosion Pitting Under Immersion and Salt Spray Environments on an As-Cast AM60 Magnesium Alloy
    Martin, H. J.
    Alvarez, R. B.
    Danzy, J.
    Horstemeyer, M. F.
    Wang, P. T.
    CORROSION, 2012, 68 (06) : 571 - 585
  • [37] Electrochemical corrosion behavior of acid treated strip cast AM50 and AZX310 magnesium alloys in 3.5 wt.% NaCl solution
    Arthanari, Srinivasan
    Nallaiyan, Rajendran
    Seon, Shin Kwang
    JOURNAL OF MAGNESIUM AND ALLOYS, 2017, 5 (03) : 277 - 285
  • [38] Cerium-based sealing of PEO coated AM50 magnesium alloy
    Mohedano, M.
    Blawert, C.
    Zheludkevich, M. L.
    SURFACE & COATINGS TECHNOLOGY, 2015, 269 : 145 - 154
  • [39] Corrosion Behavior of Gravity Cast and High-Pressure Die-Cast AM60 Mg Alloys with Ca and Y Addition
    Yu, Hui
    Yang, Xin
    Yu, Wei
    Kim, Youngmin
    Kang, Shaoming
    Huang, Lixin
    You, Bongsun
    Liu, Chunhai
    Shin, Kwangseon
    Zhao, Weimin
    METALS, 2022, 12 (03)
  • [40] Influence of cerium additions on the corrosion behaviour of high pressure die cast AM50 alloy
    Mert, Faruk
    Blawert, Carsten
    Kainer, Karl Ulrich
    Hort, Norbert
    CORROSION SCIENCE, 2012, 65 : 145 - 151
12345