Integrating the continuous improvement of measurement systems into the statistical quality control of manufacturing processes: A novel link

被引：5

作者：

Villeta, Maria ^{[1
]}

Maria Rubio, Eva ^{[2
]}

Luis Valencia, Jose ^{[1
]}

Angel Sebastian, Miguel ^{[2
]}

机构：

[1] Univ Complutense Madrid, Dept Stat & Operat Res 3, E-28040 Madrid, Spain

[2] Univ Nacl Educ Distancia, Dept Mfg Engn, E-28040 Madrid, Spain

来源：

CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2012年 / 61卷 / 01期

关键词：

Metrology; Quality control; Integration;

D O I：

10.1016/j.cirp.2012.03.017

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Reliability in measurements is a requirement for quality-oriented organisations. A novel link is presented in this work for the integration of the continuous improvement loop of measurement systems into the statistical quality control of manufacturing processes. The proposal is based on the Index of Contamination of the Capability (ICC) and the Golden Rule of Metrology. It is expressed through clear-cut decision rules that consider the uncertainty of measurement, the intended use of the measurements and the risk of inaccurate measurements. The proposal makes it possible to improve production quality. To facilitate its application, an equivalent graphical approach is provided. (C) 2012 CIRP.

引用

页码：507 / 510

页数：4

共 50 条

[31] Neural-fuzzy statistical process control (NF-SPC) application for manufacturing quality management [J].

Parreño, J ;

Priore, P ;

García, N .

IC-AI '04 & MLMTA'04 , VOL 1 AND 2, PROCEEDINGS, 2004, :36-42

[32] Smart quality control: integrating six sigma, machine learning and real-time defect prediction in manufacturing [J].

Mansour, Hamdia ;

Abohashima, Hanaa ;

Elkhouly, Heba ;

Harraz, Nermine .

INTERNATIONAL JOURNAL OF LEAN SIX SIGMA, 2025,

[33] An Intelligent Quality Control Method for Manufacturing Processes Based on a Human-Cyber-Physical Knowledge Graph [J].

Wang, Shilong ;

Yang, Jinhan ;

Yang, Bo ;

Li, Dong ;

Kang, Ling .

ENGINEERING, 2024, 41 :242-260

[34] Methodology of the analysis of variability and robust optimization for quality control systems and measurement problems [J].

Lisenkov, AN .

MEASUREMENT TECHNIQUES, 2002, 45 (07) :679-688

[35] Methodology of the Analysis of Variability and Robust Optimization for Quality Control Systems and Measurement Problems [J].

A. N. Lisenkov .

Measurement Techniques, 2002, 45 :679-688

[36] Nondestructive Quantitative Measurement for Precision Quality Control in Additive Manufacturing Using Hyperspectral Imagery and Machine Learning [J].

Yan, Yijun ;

Ren, Jinchang ;

Sun, He ;

Williams, Robert .

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS, 2024, 20 (08) :9963-9975

[37] Coordinated computerized systems aimed at management, control, and quality assurance of medical processes and informatics [J].

Machluf, Yossy ;

Pirogovsky, Avinoam ;

Palma, Elio ;

Yona, Avi ;

Navon, Amir ;

Shohat, Tamar ;

Yitzak, Amir ;

Tal, Orna ;

Ash, Nachman ;

Nachman, Michael ;

Chaiter, Yoram .

INTERNATIONAL JOURNAL OF HEALTH CARE QUALITY ASSURANCE, 2012, 25 (08) :663-681

[38] Variation Reduction for Multistage Manufacturing Processes: A Comparison Survey of Statistical-Process-Control vs Stream-of-Variation Methodologies [J].

Liu, Jian .

QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL, 2010, 26 (07) :645-661

[39] Quality Control Method of Key Processes in Multi Variety and Small Batch Manufacturing Process Based on NAD-EWMA Control Chart [J].

Chen K. ;

Jiang X. ;

Liu W. ;

Tian Z. ;

Xu X. ;

Li S. ;

Suo Y. .

Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2023, 59 (03) :232-248

[40] Quality Control-An Approach Applying Multivariate Control Charts during the Operation of Systems Involving Human Processes [J].

Mihalcin, Matthew J. ;

Mazzuchi, Thomas A. ;

Sarkani, Shahram ;

Dever, Jason R. .

SYSTEMS ENGINEERING, 2014, 17 (02) :204-212

← 1 2 3 4 5 →