Influence of functionalized carbon nanofibers on the single carbon fiber-epoxy matrix interface

被引：18

作者：

Schaefer, Joseph D. ^{[1
]}

Guzman, Mauricio E. ^{[1
]}

Lim, Chee-Sern ^{[1
]}

Rodriguez, Alejandro J. ^{[1
]}

Minaie, Bob ^{[1
]}

机构：

[1] Wichita State Univ, Dept Mech Engn, Wichita, KS 67260 USA

来源：

COMPOSITES PART B-ENGINEERING | 2013年 / 55卷

基金：

美国国家航空航天局;

关键词：

Electrophoretic deposition; Carbon fiber; Nano-structures; Interface/interphase; Stress transfer; MICROCOMPOSITES; COMPOSITES; STRENGTH; REINFORCEMENT; STATISTICS; NANOTUBES;

D O I：

10.1016/j.compositesb.2013.05.051

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Amine-functionalized carbon nanofibers (A-CNFs) were deposited on the surface of individual sized carbon fibers using electrophoretic deposition (EPD), and the average interfacial shear strength (IFSS) was determined using the single fiber fragmentation test in conjunction with Weibull analysis. The IFSS decreased by 25% for fibers acting as the negative electrode in water without CNFs, and the impact of agglomerates on IFSS estimation is discussed. Further, a 187% IFSS increase was achieved for fibers undergoing a two-stage A-CNF EPD approach. (C) 2013 Elsevier Ltd. All rights reserved.

引用

页码：41 / 47

页数：7

共 50 条

[21] Improving the interfacial properties of carbon fiber-epoxy resin composites with a graphene-modified sizing agent
Li, Lingtong
Yan, Chun
Xu, Haibing
Liu, Dong
Shi, Pengcheng
Zhu, Yingdan
Chen, Gang
Wu, Xiaofei
Liu, Wenqing
JOURNAL OF APPLIED POLYMER SCIENCE, 2019, 136 (09)
[22] Impact characterization of a carbon fiber-epoxy laminate using a nonconservative model
Martínez, AB
Sánchez-Soto, M
Velasco, JI
Maspoch, ML
Santana, OO
Gordillo, A
JOURNAL OF APPLIED POLYMER SCIENCE, 2005, 97 (06) : 2256 - 2263
[23] Sensitivity of the Carbon Fiber Interface in Epoxy
Zheng, Huasheng
Zhu, Sirong
Li, Zhuoqiu
Li, Jing
ADVANCES IN MATERIAL ENGINEERING AND MECHANICAL ENGINEERING, 2011, 69 : 79 - 82
[24] Improving the interfacial and flexural properties of carbon fiber-epoxy composites via the grafting of a hyperbranched aromatic polyamide onto a carbon fiber surface on the basis of solution polymerization
Wang, Gang
Ma, Lichun
Yang, Xiaobing
Li, Xiaoru
Han, Ping
Yang, Chao
Cong, Longliang
Song, Wenzhe
Song, Guojun
JOURNAL OF APPLIED POLYMER SCIENCE, 2019, 136 (12)
[25] Carbon fiber/epoxy composite property enhancement through incorporation of carbon nanotubes at the fiber-matrix interphase - Part I: The development of carbon nanotube coated carbon fibers and the evaluation of their adhesion
Kamae, Toshiya
Drzal, Lawrence T.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2012, 43 (09) : 1569 - 1577
[26] Effect of fiber surface functionalization on shear behavior at carbon fiber/epoxy interface through molecular dynamics analysis
Wang, Hao
Jin, Kai
Wang, Chen
Guo, Xunzhong
Chen, Zhong
Tao, Jie
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2019, 126
[27] Glycolysis of Carbon Fiber-Epoxy Unidirectional Mat Catalysed by Sodium Hydroxide
Zaini, Mariana Binti Mohd
Badri, Khairiah Haji
2014 UKM FST POSTGRADUATE COLLOQUIUM: PROCEEDINGS OF THE UNIVERSITI KEBANGSAAN MALAYSIA, FACULTY OF SCIENCE AND TECHNOLOGY 2014 POSTGRADUATE COLLOQUIUM, 2014, 1614 : 446 - 451
[28] Mechanical improvement of carbon fiber/epoxy composites by sizing functionalized carbon nanotubes on fibers
Liu, Jiaan
Yang, Tian
Wang, Bo
Yu, Zerun
Yang, Yanchao
Sun, Guixun
POLYMER COMPOSITES, 2024, 45 (12) : 10645 - 10653
[29] Adhesion force measured by atomic force microscopy for direct carbon fiber-epoxy interfacial characterization
Zheng, Nan
He, Jinmei
Gao, Jiefeng
Huang, Yudong
Besenbacher, Flemming
Dong, Mingdong
MATERIALS & DESIGN, 2018, 145 : 218 - 225
[30] The interlaminar interface of a carbon fiber epoxy-matrix composite as an impact sensor
Wang, SK
Chung, DDL
JOURNAL OF MATERIALS SCIENCE, 2005, 40 (08) : 1863 - 1867

← 1 2 3 4 5 →