Thermal performance analysis of reciprocating compressor with stepless capacity control system

被引:26
作者
Tang Bin [1 ]
Zhao Yuanyang [1 ]
Li Liansheng [1 ]
Liu Guangbin [1 ]
Wang Le [1 ]
Yang Qichao [1 ]
Xu Haiping [2 ]
Zhu Feng [2 ]
Meng Wenhui [3 ]
机构
[1] Hefei Gen Machinery Inst, State Key Lab Compressor Technol, Hefei 230031, Peoples R China
[2] Shanghai HuanTian Ind Co Ltd, Shanghai 200065, Peoples R China
[3] Shenyang Blower Works Grp Co Ltd, Shenyang 110869, Peoples R China
关键词
Reciprocating compressor; Stepless capacity control; Thermal performance; Capacity; Indicated work;
D O I
10.1016/j.applthermaleng.2013.01.036
中图分类号
O414.1 [热力学];
学科分类号
摘要
On the basic principle of stepless capacity control system for large reciprocating compressor, the thermal cycle was analyzed. The equations for the process of suction, reverse flow, compression, discharge and expansion of clearance gas were established. According to these equations, p-V diagrams at various situations were simulated. An experimental platform was setup and the compressor with designed stepless capacity control system run well. The experimental results show that the capacity of compressor can be regulated steplessly, and the motor power is reduced proportionally with respect to the reduction of capacity. During the suction process, both the flow resistance of valve and the pressure fluctuation in cylinder can be reduced by opening the suction valves with the actuators. The simulated and experimental results showed good coincidence. The clearance volume and valve clearance Mach number had a negative influence on the thermal performance of compressor with stepless capacity control system. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码:380 / 386
页数:7
相关论文
共 12 条
  • [1] Chellini R., 2003, COMPRESSOR TECHNOLOG, P16
  • [2] Danny M.D., 2005, ADV RECIPROCATING CO, P53
  • [3] Dwayne A.H., 2002, P 2002 INT PIP C
  • [4] Foreman S, COMPRESSOR VALVES UN
  • [5] Theoretical analysis and realization of stepless capacity regulation for reciprocating compressors
    Hong, W.
    Jin, J.
    Wu, R.
    Zhang, B.
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2009, 223 (E4) : 205 - 213
  • [6] Lin M, 1991, SELF ACTING VALVE CO
  • [7] Machu EH, 1994, P EUR C DEV IND COMP, P55
  • [8] Steinruck P, 1997, HYDROCARB PROCESS, V76, P79
  • [9] Tang B., 2010, DYNAMIC RESPONSE CHA
  • [10] Tang B., 2011, J MECH ENG, V47, P136