PLASTIC BEHAVIOR AND CONSTITUTIVE MODELING OF ARMOR STEEL OVER WIDE TEMPERATURE AND STRAIN RATE RANGES

被引：33

作者：

Xu, Zejian ^{[1
]}

Huang, Fenglei ^{[1
]}

机构：

[1] Beijing Inst Technol, State Key Lab Explos Sci & Technol, Beijing 100081, Peoples R China

来源：

ACTA MECHANICA SOLIDA SINICA | 2012年 / 25卷 / 06期

关键词：

armor steel; high strain rate; high temperature; plastic behavior; constitutive model; 304L STAINLESS-STEEL; ELEVATED-TEMPERATURES; IMPACT; JOINTS;

D O I：

10.1016/S0894-9166(12)60055-X

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Plastic behavior of 603 armor steel is studied at strain rates ranging from 0.001 s(-1) to 4500 s(-1), and temperature from 288 K to 873 K. Emphasis is placed on the effects of temperature, strain rate, and plastic strain on flow stress. Based on experimental results, the JC and the KHL models are used to simulate flow stress of this material. By comparing the model prediction and the experimental results of strain rate jump tests, the KHL model is shown to have a better prediction of plastic behavior under complex loading conditions for this material, especially in the dynamic region.

引用

页码：598 / 608

页数：11

共 17 条

[1] Johnston G. B., 1983, Proceedings of the 37th annual meeting of the Northeastern Weed Science Society, 1983., P51
[2] Kan QH, 2010, ACTA MECH SOLIDA SIN, V23, P95
[3] Determination of temperature rise during high strain rate deformation
Kapoor, R
Nemat-Nasser, S
[J]. MECHANICS OF MATERIALS, 1998, 27 (01) : 1 - 12
[4] Behaviors of three BCC metal over a wide range of strain rates and temperatures: experiments and modeling
Khan, AS
Liang, RQ
[J]. INTERNATIONAL JOURNAL OF PLASTICITY, 1999, 15 (10) : 1089 - 1109
[5] Quasi-static and dynamic loading responses and constitutive modeling of titanium alloys
Khan, AS
Suh, YS
Kazmi, R
[J]. INTERNATIONAL JOURNAL OF PLASTICITY, 2004, 20 (12) : 2233 - 2248
[6] EXPERIMENTAL AND THEORETICAL-STUDY OF MECHANICAL-BEHAVIOR OF 1100-ALUMINUM IN THE STRAIN RATE RANGE 10(-5)-10(4)S(-1)
KHAN, AS
HUANG, S
[J]. INTERNATIONAL JOURNAL OF PLASTICITY, 1992, 8 (04) : 397 - 424
[7] Impact and fracture response of sintered 316L stainless steel subjected to high strain rate loading
Lee, Woei-Shyan
Lin, Chi-Feng
Liu, Tsung-Ju
[J]. MATERIALS CHARACTERIZATION, 2007, 58 (04) : 363 - 370
[8] Impact properties of 304L stainless steel GTAW joints evaluated by high strain rate of compression tests
Lee, WS
Lin, CF
Liu, CY
Tzeng, FT
[J]. JOURNAL OF NUCLEAR MATERIALS, 2004, 335 (03) : 335 - 344
[9] Comparative study of the impact response and microstructure of 304L stainless steel with and without prestrain
Lee, WS
Lin, CF
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2002, 33 (09): : 2801 - 2810
[10] Plastic deformation and fracture behaviour of Ti-6Al-4V alloy loaded with high strain rate under various temperatures
Lee, WS
Lin, CF
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 241 (1-2): : 48 - 59

← 1 2 →