Wind turbine condition monitoring based on SCADA data using normal behavior models. Part 1: System description

被引:221
|
作者
Schlechtingen, Meik [1 ]
Santos, Ilmar Ferreira [2 ]
Achiche, Sofiane [3 ]
机构
[1] EnBW Erneuerbare Energien GmbH, Dept Tech Operat Wind Offshore, D-20459 Hamburg, Germany
[2] Tech Univ Denmark, Sect Solid Mech, Dept Mech Engn, Odense, Denmark
[3] Ecole Polytech Montreal, Dept Mech Engn, Machine Design Sect, Montreal, PQ, Canada
关键词
ANFIS models; Condition monitoring; Wind turbine; SCADA data; Normal behavior models;
D O I
10.1016/j.asoc.2012.08.033
中图分类号
TP18 [人工智能理论];
学科分类号
081104 ; 0812 ; 0835 ; 1405 ;
摘要
This paper proposes a system for wind turbine condition monitoring using Adaptive Neuro-Fuzzy Interference Systems (ANFIS). For this purpose: (1) ANFIS normal behavior models for common Supervisory Control And Data Acquisition (SCADA) data are developed in order to detect abnormal behavior of the captured signals and indicate component malfunctions or faults using the prediction error. 33 different standard SCADA signals are used and described, for which 45 normal behavior models are developed. The performance of these models is evaluated in terms of the prediction error standard deviations to show the applicability of ANFIS models for monitoring wind turbine SCADA signals. The computational time needed for model training is compared to Neural Network (NN) models showing the strength of ANFIS in training speed. (2) For automation of fault diagnosis Fuzzy Interference Systems (FIS) are used to analyze the prediction errors for fault patterns. The outputs are both the condition of the component and a possible root cause for the anomaly. The output is generated by the aid of rules that capture the existing expert knowledge linking observed prediction error patterns to specific faults. The work is based on continuously measured wind turbine SCADA data from 18 turbines of the 2 MW class covering a period of 30 months. The system proposed in this paper shows a novelty approach with regard to the usage of ANFIS models in this context and the application of the proposed procedure to a wide range of SCADA signals. The applicability of the set up ANFIS models for anomaly detection is proved by the achieved performance of the models. In combination with the FIS the prediction errors can provide information about the condition of the monitored components. In this paper the condition monitoring system is described. Part two will entirely focus on application examples and further efficiency evaluation of the system. (C) 2012 Elsevier B. V. All rights reserved.
引用
收藏
页码:259 / 270
页数:12
相关论文
共 50 条
  • [41] Wind Turbine Condition Monitoring using Multi-Sensor Data System
    Abdulraheem, Khalid F.
    Al-Kindi, Ghassan
    INTERNATIONAL JOURNAL OF RENEWABLE ENERGY RESEARCH, 2018, 8 (01): : 15 - 25
  • [42] Wind turbine condition monitoring using multi-sensor data system
    Abdulraheem, Khalid F. (kabdulraheem@soharuni.edu.om), 2018, International Journal of Renewable Energy Research (08):
  • [43] Normal Behavior Models for the Condition Assessment of Wind Turbine Generator Systems
    Li, Jian
    Lei, Xiao
    Li, Hui
    Ran, Li
    ELECTRIC POWER COMPONENTS AND SYSTEMS, 2014, 42 (11) : 1201 - 1212
  • [44] Wind turbine gearbox condition monitoring through the sequential analysis of industrial SCADA and vibration data
    Castellani, Francesco
    Natili, Francesco
    Astolfi, Davide
    Vidal, Yolanda
    ENERGY REPORTS, 2024, 12 : 750 - 761
  • [45] The Discriminant Model of Wind Turbine SCADA Normal Data Based on Random Forest
    He, Sheng
    Zhao, Qiancheng
    Zhang, Yingzhe
    Wang, Xian
    TENTH INTERNATIONAL SYMPOSIUM ON PRECISION MECHANICAL MEASUREMENTS, 2021, 12059
  • [46] Condition-Based Maintenance of Gensets in District Heating Using Unsupervised Normal Behavior Models Applied on SCADA Data
    Barnabei, Valerio Francesco
    Bonacina, Fabrizio
    Corsini, Alessandro
    Tucci, Francesco Aldo
    Santilli, Roberto
    ENERGIES, 2023, 16 (09)
  • [47] Wind Turbine Spindle Condition Monitoring Based on Operational Data
    Wang, Zhao-guang
    Guo, Peng
    2017 29TH CHINESE CONTROL AND DECISION CONFERENCE (CCDC), 2017, : 1435 - 1440
  • [48] Condition monitoring of wind turbine pitch system using data-driven approach
    Jin X.
    Pan H.
    Xu Z.
    Taiyangneng Xuebao/Acta Energiae Solaris Sinica, 2022, 43 (04): : 409 - 417
  • [49] Wind Turbine Prognosis Models Based on SCADA Data and Extreme Learning Machines
    Marti-Puig, Pere
    Blanco-M., Alejandro
    Serra-Serra, Moises
    Sole-Casals, Jordi
    APPLIED SCIENCES-BASEL, 2021, 11 (02): : 1 - 20
  • [50] SCADA data based realistic simulation framework to evaluate environmental impact on performance of wind turbine condition monitoring systems
    Aziz, Usama
    Charbonnier, Sylvie
    Berenguer, Christophe
    Lebranchu, Alexis
    Prevost, Frederic
    2019 4TH CONFERENCE ON CONTROL AND FAULT TOLERANT SYSTEMS (SYSTOL), 2019, : 360 - 365