All-optical error-bit amplitude monitor based on NOT and AND gates in cascaded semiconductor optical amplifiers

This paper proposes and simulates a novel all-optical error-bit amplitude monitor based on cross-gain modulation and four-wave mixing in cascaded semiconductor optical amplifiers (SOAs), which function as logic NOT and logic AND, respectively. The proposed scheme is successfully simulated for 40Gb/s return-to-zero (RZ) signal with different duty cycles. In the first stage, the SOA is followed by a detuning filter to accelerate the gain recovery as well as improve the extinction ratio. A clock probe signal is used to avoid the edge pulse-pairs in the output waveform. Among these RZ formats, 33% RZ format is preferred to obtain the largest eye opening. The normalized error amplitude, defined as error bit amplitude over the standard mark amplitude, has a dynamic range from 0.1 to 0.65 for all RZ formats. The simulations show small input power dynamic range because of the nonlinear gain variation in the first stage. This scheme is competent for nonreturn-to-zero format at 10Gb/s as well.