An investigation of the effects of cutting parameters and graphite reinforcement on quality characteristics during the drilling of Al/10B4C composites

被引：34

作者：

Ekici, Ergun ^{[1
]}

Motorcu, Ali Riza ^{[1
]}

Uzun, Gultekin ^{[2
]}

机构：

[1] Canakkale Onsekiz Mart Univ, Dept Ind Engn, Fac Engn, Canakkal, Turkey

[2] Gazi Univ, Dept Mfg Engn, Fac Technol, Ankara, Turkey

来源：

MEASUREMENT | 2017年 / 95卷

关键词：

MMCs; Drilling; Thrust force; Surface roughness; Dimensional accuracy; Burr height; METAL-MATRIX COMPOSITES; MACHINING PARAMETERS; SILICON-CARBIDE; THRUST FORCE; ALUMINUM; OPTIMIZATION; PARTICLES; WEAR; SICP;

D O I：

10.1016/j.measurement.2016.10.041

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This study investigated the effects of cutting parameters on the quality characteristics of thrust force (Ft), surface roughness (Ra), dimensional accuracy (Da) and burr height (Bh) during the drilling of Al/10B(4)C and Al/10B(4)C/5Gr composites. Machinability experiments were carried out with uncoated carbide twist drills at three different cutting speeds (18, 25 and 35 m/min) and three different feed rates (0.08, 0.112 and 0.16 mm/rev) under dry cutting conditions. The percent contribution of the cutting/drilling parameters/variables to the quality characteristics was determined using analysis of variance (ANOVA), and predictive linear equations were developed for the estimation of all the quality characteristics. As a result of the experimental study, it was determined that during the drilling of the composites, the 5% graphite reinforcement of Al/10B(4)C/5Gr decreased the thrust force and the burr height, improved the surface quality and brought the composite closer to its ideal diameter value. (C) 2016 Published by Elsevier Ltd.

引用

页码：395 / 404

页数：10

共 27 条

[1] Drilling of hybrid Al-5%SiCp-5%B4Cp metal matrix composites [J].

Ahamed, A. Riaz ;

Asokan, Paravasu ;

Aravindan, Sivanandam ;

Prakash, M. K. .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2010, 49 (9-12) :871-877

[2] Drilling of a hybrid Al/SiC/Gr metal matrix composites [J].

Altunpak, Yahya ;

Ay, Mustafa ;

Aslan, Serdar .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012, 60 (5-8) :513-517

[3] Burrs-Analysis, control and removal [J].

Aurich, J. C. ;

Dornfeld, D. ;

Arrazola, P. J. ;

Franke, V. ;

Leitz, L. ;

Min, S. .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2009, 58 (02) :519-542

[4] Some studies on drilling of hybrid metal matrix composites based on Taguchi techniques [J].

Basavarajappa, S. ;

Chandramohan, G. ;

Davim, J. Paulo .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 196 (1-3) :332-338

[5] Drilling of hybrid aluminium matrix composites [J].

Basavarajappa, S. ;

Chandramohan, G. ;

Davim, J. Paulo ;

Prabu, M. ;

Mukund, K. ;

Ashwin, M. ;

PrasannaKumar, M. .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2008, 35 (11-12) :1244-1250

[6] Characteristic properties of Al-Cu-SiCp and Al-Cu-B4Cp composites produced by hot pressing method under nitrogen atmosphere [J].

Bedir, Fevzi .

MATERIALS & DESIGN, 2007, 28 (04) :1238-1244

[7]

Brown C. A., 1998, MAT SCI ENG, V102, P31

[8] Evaluation of tool wear when machining SiCp-reinforced Al-2014 alloy matrix composites [J].

Ciftci, I ;

Turker, M ;

Seker, U .

MATERIALS & DESIGN, 2004, 25 (03) :251-255

[9] OPTIMIZATION OF MACHINING PARAMETERS FOR ALUMINUM AND SILICON CARBIDE COMPOSITE USING GENETIC ALGORITHM [J].

Dhavamani, C. ;

Alwarsamy, T. .

INTERNATIONAL CONFERENCE ON MODELLING OPTIMIZATION AND COMPUTING, 2012, 38 :1994-2004

[10]

Durairaja M., 2013, P ENG, V64, P68

← 1 2 3 →