Numerically investigating the influence of tube support plates on thermal-hydraulic characteristics in a steam generator

A three-dimensional "unit pipe" model coupled with broached tube support plates (TSPs) is developed to investigate the influence of TSPs on the thermal-hydraulic characteristics of the primary and secondary side of steam generator (SG). The model reasonably captures the unbalanced boiling phenomena in the SG secondary side, particularly in the regions surrounding the TSPs. At these points, there is an abrupt increase in secondary fluid velocity, generating recirculation distribution and local vortex. Nonuniform outer wall temperatures periodically fluctuate around the circumference of the tubes at the TSPs, with the corresponding temperature difference between the support location and flow hole gradually decaying in the primary flow direction. These thermal-hydraulic distributions are then used to determine the cross-flow energy, which is strongly related to flow-induced vibration (FIV) damage. According to the FIV distributions, FIV damage is predicted to be most severe at angles of theta = 65 degrees on the cold-leg side and theta = 120 degrees on the hot-leg side of the U-bend tube bundles. These simulated FIV damage results are in agreement with the measured plant data from a prototypical SG. Therefore, this developed "unit pipe" model can provide technical support to help alleviate FIV damage and minimize the probability of tube failure. Crown Copyright (c) 2012 Published by Elsevier Ltd. All rights reserved.