Aggregation Kinetics of Graphene Oxides in Aqueous Solutions: Experiments, Mechanisms, and Modeling

Although graphene oxide (GO) has been used in many applications to improve human life quality, its environmental fate and behavior are still largely unknown. In this work, a novel approach that combines experimental measurements and theoretical calculations was used to determine the aggregation kinetics of GO sheets in aqueous solutions under different chemistry conditions (e.g., cation valence and pH). Experimental data showed that both cation valence and pH showed significant effect on the aggregation of GO sheets. The measured critical coagulation concentrations were in good agreement with the predictions of the extended Schulze-Hardy rule. Ca2+ and Mg2+ were more effective than Na+ in aggregating the GO sheets, which could be attributed to the cross-linking between GO sheets by the divalent cations through "bridging" the functional groups at the edges of the GO sheets. When solution pH increases, deprotonation of carboxylic groups was found to play a key role in increasing GO sheet stability and surface charge development. These results suggested that edge-to-edge and face-to-face interactions were the dominant modes of GO aggregation in the presence of divalent metal ions and H+, respectively. A modified attachment efficiency (alpha) model was developed on the basis of the Maxwell approach with considerations of both primary and secondary minima. The model predictions matched the experimental measurements of the aggregation kinetics of GO sheets in aqueous solutions under all of the tested experimental conditions well.