Effect of Silica-Coated Poly(butyl methacrylate)-block-poly(methyl methacrylate) Double-Shell Particles on the Mechanical Properties of PMMA Composites

被引：7
作者：
Chakkalakal, Golda Louis [1 ]
Alexandre, Michael [2 ]
Boschetti-de-Fierro, Adriana [1 ]
Abetz, Volker [1 ]
机构：
[1] Helmholtz Zentrum Geesthacht, Polymer Res Inst, D-21502 Geesthacht, Germany
[2] Univ Liege, CERM, B-4000 Liege, Belgium
来源：
MACROMOLECULAR MATERIALS AND ENGINEERING | 2012年 / 297卷 / 09期
关键词：
atom-transfer radical polymerization (ATRP); composites; core; shell particles; poly(methyl methacrylate)s (PMMA); TRANSFER RADICAL POLYMERIZATION; NANOPARTICLES; SURFACE; SIZE;
D O I：
10.1002/mame.201100365
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Silica nanoparticles with an average diameter of 12?nm are grafted with PBMA-b-PMMA double shells through typical sequential ATRP from bromoisobutyrate initiators anchored at the silica surface using an epoxysilane. A commercially available PMMA homopolymer is used for the preparation of composites with unmodified, silane-modified and double-shell-modified silica particles. Good mechanical properties are obtained for silica double shell containing systems. The silica content in double shell particle systems is varied from 0 to 2.5?wt%. A significant improvement in impact properties is observed. The surface-modified silica particles are characterized by ATR-FTIR, NMR, GPC, and thermal analyses. TEM analysis is used to analyze the nature of dispersion of particles in the composites.
引用
收藏
页码：887 / 893
页数：7
相关论文
共 47 条
  • [21] Effect of hydrophilic-hydrophobic balance on biocompatibility of poly(methyl methacrylate) (PMMA)-hydroxyapatite (HA) composites
    Tihan, Teodora Gratiela
    Ionita, Mioara Daniela
    Popescu, Roxana Gabriela
    Iordachescu, Dana
    MATERIALS CHEMISTRY AND PHYSICS, 2009, 118 (2-3) : 265 - 269
  • [22] 3Dprinting of copper particles and poly(methyl methacrylate) beads containing poly(lactic acid) composites for enhancing thermomechanical properties
    Minh Canh Vu
    Jeong, Tae-Hyeong
    Kim, Jun-Beom
    Choi, Won Kook
    Kim, Dae Hoon
    Kim, Sung-Ryong
    JOURNAL OF APPLIED POLYMER SCIENCE, 2021, 138 (05)
  • [23] Effect of hydroxyapatite filler concentration on mechanical properties of poly (methyl methacrylate) denture base
    Aldabib, Jamal Moammar
    Ishak, Zainal Arifin Mohd
    SN APPLIED SCIENCES, 2020, 2 (04):
  • [24] Investigation of structural, optical and mechanical properties of poly(methyl methacrylate)/zirconium oxide (PMMA/ZrO2) nanocomposite films
    Horti, N. C.
    Mathapati, S. I.
    Banapurmath, N. R.
    Pujari, V. S.
    Inamdar, S. R.
    Kamatagi, M. D.
    POLYMER BULLETIN, 2025,
  • [25] Morphology and properties of poly(methyl methacrylate) (PMMA) filled with mesoporous silica (MCM-41) prepared by melt compounding
    Sibeko, M. A.
    Saladino, M. L.
    Luyt, A. S.
    Caponetti, E.
    JOURNAL OF MATERIALS SCIENCE, 2016, 51 (08) : 3957 - 3970
  • [26] Correlation between Agglomerates Hausdorff Dimension and Mechanical Properties of Denture Poly(methyl methacrylate)-Based Composites
    Elhmali, Houda Taher
    Serpa, Cristina
    Radojevic, Vesna
    Stajcic, Aleksandar
    Petrovic, Milos
    Jankovic-Castvan, Ivona
    Stajcic, Ivana
    FRACTAL AND FRACTIONAL, 2024, 8 (06)
  • [27] Preparation and Properties of Core-Shell Nanosilica/Poly(methyl methacrylate-butyl acrylate-2,2,2-trifluoroethyl methacrylate) Latex
    Zheng Wei
    He Ling
    Liang Junyan
    Chang Gang
    Wang Na
    JOURNAL OF APPLIED POLYMER SCIENCE, 2011, 120 (02) : 1152 - 1161
  • [28] Improvement in structural, thermal, charge transport and mechanical properties of poly (methyl methacrylate)/polyindole composites for optoelectronic devices
    Sebastian, Annumaria
    Gopika, R.
    Anju, R.
    Verma, Meenakshi
    Ramesan, M. T.
    PHYSICA SCRIPTA, 2023, 98 (06)
  • [29] Cellulose Nanocrystals/Poly(Methyl Methacrylate) Nanocomposite Films: Effect of Preparation Method and Loading on the Optical, Thermal, Mechanical, and Gas Barrier Properties
    Deng, Fei
    Li, Mei-Chun
    Ge, Xin
    Zhang, Yinhang
    Cho, Ur Ryong
    POLYMER COMPOSITES, 2017, 38 : E137 - E146
  • [30] Effects of titanate coupling agent on the mechanical, thermal, and morphological properties of poly(methyl methacrylate)/hydroxyapatite denture base composites
    Tham, W. L.
    Chow, W. S.
    Ishak, Z. A. Mohd
    JOURNAL OF COMPOSITE MATERIALS, 2011, 45 (22) : 2335 - 2345
12345