Microstructure Formation Properties of ZrO2 Coating by Powder, Suspension and Liquid Precursor Plasma Spraying

被引：7

作者：

Gulyaev, Igor ^{[1
,2
]}

Kuzmin, Viktor ^{[1
,3
]}

Kornienko, Elena ^{[4
]}

Vashchenko, Sergey ^{[1
]}

Sergachev, Dmitry ^{[1
]}

机构：

[1] RAS, Inst Theoret & Appl Mech SB, 4-1 Inst Skaya St, Novosibirsk 630090, Russia

[2] Ugra State Univ, 16 Chekhov Str, Khanty Mansiysk 628012, Russia

[3] Siberian State Univ Water Transport, 33 Schetinkina, Novosibirsk 630099, Russia

[4] Novosibirsk State Tech Univ, 20 K Marksa Pr, Novosibirsk 630073, Russia

来源：

MATERIALS TODAY-PROCEEDINGS | 2019年 / 11卷

关键词：

zirconia; YSZ; thermal barrier coatings; TBC; plasma spray; APS; SPS; LPPS; powder; suspension; precursor; structure; porosity;

D O I：

10.1016/j.matpr.2019.01.008

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The research provides a brief analysis of the requirements for the plasma sprayed zirconia for obtaining thermal barrier coatings and solid oxide electrochemical devices. We present the results of depositing 7-8% YSZ coatings by powder spraying (APS) in the regimes of low and high velocity plasma flow as well as the results of liquid materials plasma spraying, namely of suspension and precursor solution (SPS and LPPS). The studies of the coatings microstructure are executed by analyzing SEM images. APS powder coatings are characterized by high porosity of 20-30% with coarse microstructure, LPPS coating has a porosity of 12% and columnar structure, and the SPS coating has a low porosity of 1.4 % and a gas-tight structure. (C) 2019 Elsevier Ltd. All rights reserved. Selection and/or Peer-review under responsibility of International Conference on Modern Trends in Manufacturing Technologies and Equipment 2018: Materials Science.

引用

页码：430 / 435

页数：6

共 11 条

[1] Ceramic Top Coats of Plasma-Sprayed Thermal Barrier Coatings: Materials, Processes, and Properties
Bakan, Emine
Vassen, Robert
[J]. JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2017, 26 (06) : 992 - 1010
[2] Analysis and optimization of gas-thermal spray process in terms of condensed phase velocity and temperature
Dolmatov, A. V.
Gulyaev, I. P.
Kuzmin, V. I.
Lyskov, E. A.
Ermakov, K. A.
[J]. THERMOPHYSICS AND AEROMECHANICS, 2017, 24 (01) : 83 - 94
[3] What Do We Know, What are the Current Limitations of Suspension Plasma Spraying?
Fauchais, P.
Vardelle, M.
Vardelle, A.
Goutier, S.
[J]. JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2015, 24 (07) : 1120 - 1129
[4] Gulyaev I P, 2014, CERAM INT, V41, P101
[5] Effect of plasma spraying regimes on structure and properties of Ni3Al coatings
Kornienko, E. E.
Mul, D. O.
Rubtsova, O. A.
Vaschenko, S. P.
Kuzmin, V. I.
Gulyaev, I. P.
Sergachev, D. V.
[J]. THERMOPHYSICS AND AEROMECHANICS, 2016, 23 (06) : 919 - 927
[6] Technique of Formation of an Axisymmetric Heterogeneous Flow During Thermal Spraying of Powder Materials
Kuz'min, V. I.
Mikhal'Chenko, A. A.
Kovalev, O. B.
Kartaev, E. V.
Rudenskaya, N. A.
[J]. JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2012, 21 (01) : 159 - 168
[7] Equipment and technologies of air-plasma spraying of functional coatings
Kuzmin, Viktor
Gulyaev, Igor
Sergachev, Dmitry
Vaschenko, Sergey
Kornienko, Elena
Tokarev, Alexander
[J]. INTERNATIONAL CONFERENCE ON MODERN TRENDS IN MANUFACTURING TECHNOLOGIES AND EQUIPMENT (ICMTMTE 2017), 2017, 129
[8] Liquid Feedstock Plasma Spraying: An Emerging Process for Advanced Thermal Barrier Coatings
Markocsan, Nicolaie
Gupta, Mohit
Joshi, Shrikant
Nylen, Per
Li, Xin-Hai
Wigren, Jan
[J]. JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2017, 26 (06) : 1104 - 1114
[9] Nemudry A. P., 2018, 3 SCI TECHN S CATALY
[10] Pawlowski L, 2008, SCI ENG THERMAL SPRA, DOI DOI 10.1002/9780470754085

← 1 2 →