Two improvements on numerical simulation of 2-DOF vortex-induced vibration with low mass ratio

被引:9
|
作者
Kang, Zhuang [1 ]
Ni, Wen-chi [1 ]
Zhang, Xu [1 ]
Sun, Li-ping [1 ]
机构
[1] Harbin Engn Univ, Deepwater Engn Res Ctr, Harbin 150001, Heilongjiang, Peoples R China
基金
中国国家自然科学基金;
关键词
2-DOF vortex-induced vibration; numerical simulation; modified turbulence model; acceleration; CIRCULAR-CYLINDER; FLOW; COMPUTATION;
D O I
10.1007/s13344-017-0087-1
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Till now, there have been lots of researches on numerical simulation of vortex-induced vibration. Acceptable results have been obtained for fixed cylinders with low Reynolds number. However, for responses of 2-DOF vortex-induced vibration with low mass ratio, the accuracy is not satisfactory, especially for the maximum amplitudes. In Jauvtis and Williamson's work, the maximum amplitude of the cylinder with low mass ratio m*=2.6 can reach as large as 1.5D to be called as the "super-upper branch", but from current literatures, few simulation results can achieve such value, even fail to capture the upper branch. Besides, it is found that the amplitude decays too fast in the lower branch with the RANS-based turbulence model. The reason is likely to be the defects of the turbulence model itself in the prediction of unsteady separated flows as well as the unreasonable setting of the numerical simulation parameters. Aiming at above issues, a modified turbulence model is proposed in this paper, and the effect of the acceleration of flow field on the response of vortex-induced vibration is studied based on OpenFOAM. By analyzing the responses of amplitude, phase and trajectory, frequency and vortex mode, it is proved that the vortex-induced vibration can be predicted accurately with the modified turbulence model under appropriate flow field acceleration.
引用
收藏
页码:764 / 772
页数:9
相关论文
共 50 条
  • [1] Two improvements on numerical simulation of 2-DOF vortex-induced vibration with low mass ratio
    Zhuang Kang
    Wen-chi Ni
    Xu Zhang
    Li-ping Sun
    China Ocean Engineering, 2017, 31 : 764 - 772
  • [2] Two Improvements on Numerical Simulation of 2-DOF Vortex-Induced Vibration with Low Mass Ratio
    KANG Zhuang
    NI Wen-chi
    ZHANG Xu
    SUN Li-ping
    ChinaOceanEngineering, 2017, 31 (06) : 764 - 772
  • [3] Numerical simulation method for 2-DOF vortex-induced vibration
    Sun L.
    Zhang X.
    Ni W.
    Zhang, Xu (zhangxu_heu@163.com), 1600, Chinese Vibration Engineering Society (36): : 22 - 26and67
  • [4] Numerical Simulation of Vortex-Induced Transverse Vibration of a Cylinder with Very Low Mass Ratio
    Zhang, Xinxing
    Hu, Minghan
    Cai, Jiancheng
    Babenko, Andrii
    Shiju, E.
    Xu, Zisheng
    SHOCK AND VIBRATION, 2022, 2022
  • [5] A numerical investigation on capturing the maximum transverse amplitude in vortex induced vibration for low mass ratio
    Kang, Zhuang
    Ni, Wenchi
    Sun, Liping
    MARINE STRUCTURES, 2017, 52 : 94 - 107
  • [6] Advances and Trends in Numerical Simulation of Vortex-induced Vibration
    Yin Zhong-jun
    Wang Xiao-song
    Han Tian
    MANAGEMENT, MANUFACTURING AND MATERIALS ENGINEERING, PTS 1 AND 2, 2012, 452-453 : 1318 - 1323
  • [7] Vortex-induced vibration characteristics of a low-mass-ratio flexible cylinder
    Quen, Lee Kee
    Abu, Aminudin
    Kato, Naomi
    Muhamad, Pauziah
    Siang, Kang Hooi
    Hee, Lim Meng
    Rahman, Mohd Asamudin A.
    STRUCTURAL ENGINEERING AND MECHANICS, 2020, 75 (05) : 621 - 631
  • [8] Mass ratio effect on vortex-induced vibration for two tandem square cylinders at a low Reynolds number
    Qiu, Tao
    Lin, Weiqun
    Du, Xiaoqing
    Zhao, Yan
    PHYSICS OF FLUIDS, 2021, 33 (12)
  • [9] Numerical Simulation of Vortex-Induced Vibration of TTR and SCR
    Wang, Jiachen
    He, Zhilong
    Li, Dantong
    Wu, Weifeng
    JOURNAL OF MARINE SCIENCE AND ENGINEERING, 2022, 10 (05)
  • [10] Numerical Simulation of the Damping Influence on Vortex-Induced Vibration
    Yin, Zhongjun
    Cao, Yanshu
    Han, Tian
    Wang, Xiaosong
    VIBRATION, STRUCTURAL ENGINEERING AND MEASUREMENT II, PTS 1-3, 2012, 226-228 : 146 - 149