The effect of cutting force and tool wear in milling INCONEL 718

被引：6
作者：
Kamdani, K. [1 ]
Ashaary, I [1 ]
Hassan, S. [1 ]
Lajis, M. A.
机构：
[1] Univ Tun Hussein Onn Malaysia, Precis Machining Res Ctr PREMACH, Fac Mech & Mfg Engn, Batu Pahat 86400, Johor, Malaysia
来源：
INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING (ICME2018) | 2019年 / 1150卷
关键词：
NICKEL-BASED SUPERALLOY; SURFACE INTEGRITY; LIFE;
D O I：
10.1088/1742-6596/1150/1/012046
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Inconel 718 is known for being a difficult to cut material, this is due to its high strength at high temperatures, low thermal conductivity and high work hardening. These excellent properties makes Inconel 718 suitable for high temperature applications. This paper presents a study on the effects of the radial depth of cut on the cutting force variations and tool wear propagation in the first cut using TiAlN coated inserts as the cutting tool. The machining operation conducted was side milling at cutting speeds of 80m/min, 100m/min and 120 m/min. The results obtained shows that the cutting forces and tool wear increase with increasing radial depth of cut.
引用
收藏
页数：6
相关论文
共 50 条
  • [31] Wear Behavior of TiAlVN-Coated Tools in Milling Operations of INCONEL® 718
    Sebbe, Naiara P. V.
    Fernandes, Filipe
    Silva, Franciso J. G.
    Pedroso, Andre F. V.
    Sales-Contini, Rita C. M.
    Barbosa, Marta L. S.
    Durao, Luis M.
    Magalhaes, Luis L.
    COATINGS, 2024, 14 (03)
  • [32] Force model for complex profile tool in broaching Inconel 718
    Jing Ni
    Kangcheng Tong
    Zhen Meng
    Kai Feng
    The International Journal of Advanced Manufacturing Technology, 2022, 119 : 1153 - 1165
  • [33] Cutting force modeling and machinability investigation of Inconel 718 using ultrasonic vibration-electrical discharge assisted milling
    Xu, Moran
    Wei, Rong
    Cao, Longchao
    Li, Junxiang
    Xiong, Xiaoshuang
    Yu, Lianqing
    Li, Changping
    Ko, Tae Jo
    JOURNAL OF MANUFACTURING PROCESSES, 2025, 136 : 1 - 17
  • [34] Extraction of tool wear indicators in peck-drilling of Inconel 718
    Jimenez, Amaia
    Arizmendi, Miguel
    Sanchez, Jose Manuel
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 114 (9-10) : 2711 - 2720
  • [35] Influence of tool wear on residual stresses when turning Inconel 718
    Madariaga, A.
    Kortabarria, A.
    Hormaetxe, E.
    Garay, A.
    Arrazola, P. J.
    3RD CIRP CONFERENCE ON SURFACE INTEGRITY, 2016, 45 : 267 - 270
  • [36] Tool wear and chip morphology in high-speed milling of hardened Inconel 718 under dry and cryogenic CO2 conditions
    Halim, N. H. A.
    Haron, C. H. C.
    Ghani, J. A.
    Azhar, M. F.
    WEAR, 2019, 426 : 1683 - 1690
  • [37] Effects of Cutting Speed on Chip Characteristics and Tool Wear Mechanisms During Dry Machining of Inconel 718 Using Uncoated WC Tool
    Rakesh, Merugu
    Datta, Saurav
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2019, 44 (09) : 7423 - 7440
  • [38] Tool Wear And Cutting Forces When Machining Inconel 718 Under Cryogenic Conditions: Liquid Nitrogen and Carbon Dioxide
    Chaabani, S.
    Rodriguez, I.
    Cuesta, M.
    Ayed, Y.
    Arrazola, P. J.
    Germain, G.
    PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2019), 2019, 2113
  • [39] Wear mechanism and notch wear location prediction model in ball nose end milling of Inconel 718
    Kasim, M. S.
    Haron, C. H. Che
    Ghani, J. A.
    Sulaiman, M. A.
    Yazid, M. Z. A.
    WEAR, 2013, 302 (1-2) : 1171 - 1179
  • [40] Investigations on the Surface Integrity and Wear Mechanisms of TiAlYN-Coated Tools in Inconel 718 Milling Operations
    Silva, Francisco J. G.
    Sebbe, Naiara P. V.
    Costa, Ruben D. F. S.
    Pedroso, Andre F. V.
    Sales-Contini, Rita C. M.
    Barbosa, Marta L. S.
    Martinho, Rui P.
    MATERIALS, 2024, 17 (02)
12345