Fabrication and Analysis of Long Fiber Reinforced Polypropylene Prepared via Injection Molding

被引：9

作者：

Park, Seon Yeong ^{[1
]}

Song, Young Seok ^{[1
]}

机构：

[1] Dankook Univ, Dept Fiber Syst Engn, Gyeonggi 16890, South Korea

来源：

MACROMOLECULAR RESEARCH | 2020年 / 28卷 / 08期

基金：

新加坡国家研究基金会;

关键词：

polypropylene; glass fiber; carbon fiber; long fiber reinforced thermoplastics; injection-molding; MOLDED LONG; MECHANICAL-PROPERTIES; LENGTH; COMPOSITES; STRENGTH;

D O I：

10.1007/s13233-020-8090-4

中图分类号：

O63 [高分子化学（高聚物）];

学科分类号：

070305 ; 080501 ; 081704 ;

摘要：

Fiber reinforcement leads to an improvement in mechanical properties of composites. In particular, long fiber thermoplastics (LFT) show more remarkable enhancement in the properties than short fiber thermoplastics (SFT). In this study, different fiber lengths, fiber loadings, and processing methods were considered to understand their effects on the physical properties more in-depth. It was found that significant breakage of fibers occurred during the screw based injection molding, which yielded a significant reduction in the properties. The orientation of fiber was observed experimentally and compared with the result of numerical simulation.

引用

页码：714 / 720

页数：7

共 26 条

[1] Mechanical properties of injection-molded carbon fiber/polypropylene composites hybridized with nanofillers [J].

Arao, Y. ;

Yumitori, S. ;

Suzuki, H. ;

Tanaka, T. ;

Tanaka, K. ;

Katayama, T. .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2013, 55 :19-26

[2] High strength injection molded thermoplastic composites [J].

Azenha, Joao ;

Gomes, Marta ;

Silva, Pedro ;

Pontes, Antonio J. .

POLYMER ENGINEERING AND SCIENCE, 2018, 58 (04) :560-567

[3] Investigation of process induced warpage for pultrusion of a rectangular hollow profile [J].

Baran, Ismet ;

Hattel, Jesper H. ;

Akkerman, Remko .

COMPOSITES PART B-ENGINEERING, 2015, 68 :365-374

[4] X-ray microtomography (micro-CT): a reference technology for high-resolution quantification of xylem embolism in trees [J].

Cochard, H. ;

Delzon, S. ;

Badel, E. .

PLANT CELL AND ENVIRONMENT, 2015, 38 (01) :201-206

[5] Effect of recycling on polypropylene composites reinforced with glass fibres [J].

Colucci, Giovanna ;

Simon, Hadrien ;

Roncato, Davide ;

Martorana, Brunetto ;

Badini, Claudio .

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2017, 30 (05) :707-723

[6] Carbon Fiber Reinforced Thermoplastic Composites for Future Automotive Applications [J].

Friedrich, K. .

VIII INTERNATIONAL CONFERENCE ON TIMES OF POLYMERS AND COMPOSITES: FROM AEROSPACE TO NANOTECHNOLOGY, 2016, 1736

[7]

Hsissou R, 2017, J MAT ENV SCI, V8, P12

[8] Rheological behavior of three polymers and their hybrid composites (TGEEBA/MDA/PN), (HGEMDA/MDA/PN) and (NGHPBAE/MDA/PN) [J].

Hsissou, Rachid ;

Elharfi, Ahmed .

JOURNAL OF KING SAUD UNIVERSITY SCIENCE, 2020, 32 (01) :235-244

[9] Effects of fiber length distribution on flow property and internal microstructure of an injection molded part [J].

Hwang, Soon Hyoung ;

Lee, Doo Jin ;

Youn, Hye Rim ;

Song, Young Seok ;

Youn, Jae Ryoun .

MACROMOLECULAR RESEARCH, 2015, 23 (09) :844-849

[10] Effects of processing methods on the electrical conductivity, electromagnetic parameters, and EMI shielding effectiveness of polypropylene/nickel-coated carbon fiber composites [J].

Lee, Seung Hwan ;

Kim, Jae Young ;

Koo, Chong Min ;

Kim, Woo Nyon .

MACROMOLECULAR RESEARCH, 2017, 25 (09) :936-943

← 1 2 3 →