Investigation of the Frictional Behavior in a Roller Linear Motion Guide under Mixed EHL

被引：15

作者：

Cheng, De-Jun ^{[1
]}

Xu, Feng ^{[1
]}

Xu, Sheng-Hao ^{[1
]}

Kim, Su-Jin ^{[2
]}

机构：

[1] Jiangsu Univ Sci & Technol, Sch Mech Engn, Zhenjiang, Jiangsu, Peoples R China

[2] Gyeongsang Natl Univ, Sch Mech Engn, Jinju, South Korea

来源：

TRIBOLOGY TRANSACTIONS | 2020年 / 63卷 / 03期

关键词：

Roller linear motion guide; micro-macro contact analysis; friction model; grease-lubricated contact; mixed EHL; ROLLING-SLIDING CONTACT; BALL-BEARING; TORQUE; LUBRICATION; PREDICTION; GREASES; SYSTEM; FORCE; MODEL; HEAT;

D O I：

10.1080/10402004.2020.1726541

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In order to study the frictional behavior of a roller linear motion guide (RLMG) in mixed elastohydrodynamic lubrication (EHL), a micro-macro contact analysis is employed to analyze the contact parameters at the contact surface, such as the contact load and deformation, shear stress due to sliding effect, and shear stress of the lubricant. Then a friction model is developed via the combination of local friction analysis with a micro-macro contact analysis. The effectiveness of the friction model was validated by experimental results. The Stribeck frictional behavior of the RLMG was analyzed in detail. Furthermore, effects of the geometrical parameters and operating conditions on the friction of the RLMG are discussed. The study provides not only an approach for the study of the RLMG friction but also a theoretical foundation for reasonably reducing the friction and improving the mechanical efficiency of an RLMG.

引用

页码：528 / 542

页数：15

共 45 条

[1] Temperature rise of double-row tapered roller bearings analyzed with the thermal network method [J].

Ai, Siyuan ;

Wang, Wenzhong ;

Wang, Yunlong ;

Zhao, Ziqiang .

TRIBOLOGY INTERNATIONAL, 2015, 87 :11-22

[2] Characterization of frictional hysteresis in ball-bearing guideways [J].

Al-Bender, F ;

Symens, W .

WEAR, 2005, 258 (11-12) :1630-1642

[3]

Albrecht A., 2009, WARMEDEHNUNGSKOMPENS

[4]

[Anonymous], 2013, THK LIN MOT SYST CAT

[5] The influence of the lubricant viscosity on the rolling friction torque [J].

Balan, Mihaela Rodica D. ;

Stamate, Vasile Ciprian ;

Houpert, Luc ;

Olaru, Dumitru N. .

TRIBOLOGY INTERNATIONAL, 2014, 72 :1-12

[6]

Bentall R.H., 1967, INT J MECH SCI, V9, P389

[7]

Bhushan B., 2013, Introduction to Tribology, P501

[8] Hydrodynamic force and moment in pure rolling lubricated contacts. Part 2: point contacts [J].

Biboulet, N. ;

Houpert, L. .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2010, 224 (J8) :777-787

[9]

Cann P. M., 2007, Lubrication Science, V19, P183, DOI 10.1002/ls.39

[10] The transition between fully flooded and starved regimes in EHL [J].

Cann, PME ;

Damiens, B ;

Lubrecht, AA .

TRIBOLOGY INTERNATIONAL, 2004, 37 (10) :859-864

← 1 2 3 4 5 →